The Camburg 4" Lift Spindle design and construction is much stronger than the factory steering knuckle. This provides an increase in strength required for extreme off road use. Each spindle is CNC machined and fully fabricated with an internally gusseted boxed design. Please note, the Camburg Tacoma lift spindles do add 3/4" width per side to correct spindle offset as well as more tire clearance between the tire sidewall and the upper control arms. The steering arm angle is repositioned to eliminate binding on the factory outer tie rods at full droop. With Camburg's superior strength you can still utilize the factory sway bar on stock applications or mid travel setups. These spindles are machined and manufactured 100% in-house for the highest quality & control.
4" of added lift and ground clearance
3/4" wider per side for increased track width and clearance
Fabricated box structure with internal gussets and CNC machined hub center
Steering arm re-positioned to improve tie rod angle
Speed sensor inside of spindle for added protection
Includes high strength 12pt alloy hardware
Powder coated matte black finish
Requires Installation of Longer Brake Hoses - Purchased Separately
Not designed for use with drop down bracket kits
Maximum wheel backspacing 5.00" inches.
Camburg offers a number of additional suspension components that can further improve the on and off-road performance of your Tacoma. If you are looking to put together a complete suspension system please let us know. Camburg now offers two different upper control arm kits, performance replacement front coilovers, rear shock upgrades, and more. If you don't see the Camburg product you want listed on our site please let us know and we will add it! PerformanceLifts.com sells the entire line of Camburg products at great prices!
|Free Shipping||Free Ground Shipping!|
|Vehicle Year||2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005|
|Drive Type||2-Wheel Drive|
|Made In the USA||Yes|