Features & Benefits:
Retains factory track width keeping tires under fenders
ESC and Traction Control compliant with 37″ tall tires
Retains Fox Shox for a factory Raptor ride
High arched Crossmembers utilize Ford SVT control arms
Front diff drop brackets retain proper CV angles
Installation & Tech:
Estimated installation time is approximately 3 to 4 hours. Welding is not required. No Driveshaft modifications are required. This lift is designed to clear a 37" tire without having to increase the spring preload on your Fox coilovers. This means you can increase the tire size without losing droop or rebound travel at ride height caused by increasing the preload too much on the springs. If you want to run 37" tires but don't want to mess with the awesome ride and handling the Raptor is known for this Fabtech K2186 kit is a good solution. Please note however that OEM wheels and tires cannot be used.
K2186 Kit Contents:
FTS22161 - COMPONENT BOX 1 of 2
FTS22162 - COMPONENT BOX 2 of 2
For more information on this or any other Fabtech Motorsports product please click on the "Ask A Question" link located at the very top of this page.
This item ships for FREE via Standard Ground Service to any address in the contiguous 48 United States of America! Alaska, Hawaii, and International customer should contact us before placing an order.
|Free Ground Shipping||Free 48 USA Ground Shipping!|
|Vehicle Model||F150 Raptor|
|Model Year||2010, 2011, 2012, 2013|
|Drive Type||4-Wheel Drive|
|Made In the USA||Yes|