ICON 2005-2007 F250 & F350 4.5" Lift - Stage 2 # 64501
ICON # 64501 STAGE 2 SUSPENSION SYSTEM
This ICON Vehicle Dynamics 4.5" Stage 2 Suspension Lift System # 64501 is designed to fit the 2005, 2006, and 2007 F250 and F350 Super Duty Ford 4x4 trucks. Please note, this system will NOT fit the 2008 or newer trucks! This ICON 4.5" lift is designed only for use on 4wd models equipped with the automatic transmission! Please note, this kit is not designed for use with standard cab trucks! After years of testing and refinement the ICON 4.5" suspension lift systems for the SuperDuty has gained the reputation as the best performing lift kit on the market. The reason this kit is so well liked is simple, it has excellent street manners and performs quite well off-road. If you want the best riding kit for your 2005, 2006 or 2007 Super Duty you've found it!
Brand | ICON Vehicle Dynamics |
---|---|
Manufacturer | ICON Vehicle Dynamics |
Part Number | 64501 |
MPN | 64501 |
Vehicle Year | 2007, 2006, 2005 |
Vehicle Make | Ford |
Vehicle Model | F250, F350 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |
Kit Features:
50% increase in wheel travel
Less body-roll than stock truck
2.5" more travel from ride height to the front bump stops
State-of-the-art dual-rate coil spring
Lifetime guarantee that coil springs won't sag
Adjustable pan-rod bar for perfect front-end alignment capabilities
Front axle position optimized for tire clearance (Clears up to 37x12.50 tires)
Real world performance, mono-tube shocks fine-tuned for each application by ICON (included with kit)
No change in towing capacity
No drive shaft modifications needed
Stock drive shafts are fully functional
100% Bolt-on system - no drilling, cutting or welding necessary for install
No stacking of rear blocks. One piece rear block with built-in bump stop arm
MADE IN THE USA - every bit of it!
Kit Contents:
1 x 64000 = 4.5" Primary Box Kit
1 x 64010 = 4.5" Lift Dual Rate Coil Springs
1 x 64030 = Adjustable Pan Rod Bar
1 x 64040 = Radius Arm Drop Down Brackets
1 x 196275 = 5" Fabricated Rear Blocks w/ Built in Bump Stop
1 x 37002 = Rear U-Bolt Kit
2 x 67610 = ICON 2.5" Smooth Body Front Shocks
2 x 37601 = ICON 2.5" Smooth Body Rear Shocks
Rear lift... we offer three different ICON Rear Block Lift Heights for use with this lift. Please note that the Icon block will replace the factory installed Ford block. Most SuperDuty trucks will sit nearly level with the 4.5" front lift and a 5" Rear Lift Block installed. If you want the rear of your truck to sit slightly higher in the rear we also offer the ICON 6" rear lift block kit at no additional cost. If you prefer having the Front of your truck higher than the front we also offer the ICON 4" Rear Lift Block as well. This ICON # 64501 System Includes a complete set of ICON 2.50" Smooth Body Shock Absorbers. The ICON 2.5 Aluminum Series shocks are valved specifically for use with the ICON 4.5" suspension lift. A pair of front and rear shocks are included. Regarding tire size... this ICON 4.5" lift will clear up to a 37" diameter tire. Please note, in some cases slight trimming may be required to properly clear a 37" tire. The use of wider aftermarket wheel may also cause rubbing issues with 37" tires wider than 12.50 inches. For more information on this or any other Icon Vehicle Dynamics product please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 48 United States of America! Alaska, Hawaii and International customers should contact PerformanceLifts.com to receive a shipping quote before placing an order.
Brand | ICON Vehicle Dynamics |
---|---|
Manufacturer | ICON Vehicle Dynamics |
Part Number | 64501 |
MPN | 64501 |
Vehicle Year | 2007, 2006, 2005 |
Vehicle Make | Ford |
Vehicle Model | F250, F350 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |