ICON 2000-2005 Ford Excursion 3" Suspension Lift # 43000-99
This Icon Vehicle Dynamics 3" Lift Kit is designed to fit all 2000-2005 Ford Excursion vehicles built on the 4x4 chassis. This item will NOT fit 2wd models! Excursion owners pay attention - its easy to dismiss this ICON 3" 43000-99 kit as just another lift kit. It might look similar to other kits but believe us when we say its hands down better than the rest! ICON designs and builds this race inspired suspension system using the same great quality that has made their entire line of Heavy Duty Ford Kits world famous. This ICON 43000-99 3" Suspension System was developed for and tested on Ford SuperDuty and Excursion vehicles in the deserts of Baja Mexico. The same kit that Off-Road Race teams rely on for chase duty are available in a bolt-on kit for the 4wd Excursion. Each Icon Vehicle Dynamics suspension lift is built from the ground up to be bulletproof. Improved performance and a more aggressive stance will give your 4x4 Excursion the look it deserves and the ride you and your passengers want! Keep reading below for more details...
Brand | ICON Vehicle Dynamics |
---|---|
Manufacturer | ICON Vehicle Dynamics |
Part Number | 43000-99 |
MPN | 43000-99 |
Vehicle Year | 2005, 2004, 2003, 2002, 2001, 2000 |
Vehicle Make | Ford |
Vehicle Model | Excursion |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |
ICON Vehicle Dynamics Ford Excursion 3" Suspension System. Fits 2000, 2001, 2002, 2003, 2004 and 2005 Excursion 4x4 models only. Will NOT fit 2wd models. ICON starts with laser cut pieces to ensure a precise fit and finishes up with some of the prettiest and strongest welds you'll ever see in a production lift kit. This is NOT a cheap mass production kit made overseas. This product is MADE IN THE USA and you pay more and you get more when you buy Icon Vehicle Dynamics products, simple as that. Yes, this lift kit is super strong and it rides great... but the real beauty of the Icon 43000-99 3" lift spring hanger and shackle kit is it allows the stock front leaf springs to be reused and makes for a super easy installation. The best feature is this kit provides increased suspension travel and better shock absorbers which allow this kit to ride better than stock!
Ford Excursion owners wanting to level their SUV generally run the 3" front lift in the front and a 2" lift for the rear. Excursion SUV's do not sit as low in the front compared to the F-250 and F-350 trucks. PerformanceLifts.com recommends all customers measure the difference in front to rear height to determine the correct rear block kit as Excursion heights do vary. If you want to lift your vehicle and retain the factory look, (higher in the rear) a taller rear block kit will be required. This Icon Vehicle Dynamics Excursion 3" lift system comes complete with BULLETPROOF spring hanger brackets and replacement front shackles. With no change in spring rate and the optional Bilstein 5100 or Icon V.S. Signature series shock absorbers, the ride quality cannot be beat. This Icon system is very plush and extremely drivable in the corners and maintains the factory tow ratings. The Icon V.S. Signature series shock is the best riding shock we offer for this lift, slightly better than the Bilstein but more expensive as Icon produces their V.S. series shock absorbers in-house. The Bilstein 5100 Series Shock Absorber has a Limited Lifetime Warranty whereas the Icon V.S. Shock warranty is only 90 days. All required hardware and fasteners necessary to install this kit are included, as are detailed instructions.
Kit Contents:
1 x 33099 - 3" Front Lift Hangers and Shackles
1 x 33100 - 1" Bump Stop Spacers
1 x 194275 - 4" Block Kit
1 x 37003 - 99-Up Rear 15" U-Bolt
2 x 196001 - Excursion Rear Bar Pin
Optional Items:
An adjustable pan rod bar is available for 2000-2005 4x4 Excursion vehicles and is highly recommended. The adjustable pan rod bar allows you to easily adjust the position of the front axle under the vehicle and get it properly centered beneath the frame rails. The ICON Adjustable Pan Rod Bar # 39290 is considered a necessity by PerformanceLifts.com and ICON Vehicle Dynamics.
This 3" lift kit fits 2000, 2001, 2002, 2003, 2004 and 2005 model year 4x4 Excursion only and works with all power and drivetrain configurations, including the 7.3L and 6.0L PowerStroke Diesels, as well as those equipped with the 5.4L V8 and 6.8L V10 Triton gas motors. Will not fit ANY 2wd models! If you have installation questions please review the Installation Guide available online here: Icon 3" Lift Kit
For more information please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to all addresses located in the contiguous 48 United States of America & Hawaii!
Brand | ICON Vehicle Dynamics |
---|---|
Manufacturer | ICON Vehicle Dynamics |
Part Number | 43000-99 |
MPN | 43000-99 |
Vehicle Year | 2005, 2004, 2003, 2002, 2001, 2000 |
Vehicle Make | Ford |
Vehicle Model | Excursion |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |