Click here to ask a question

Tech Support Sales: (949) 629-3017 - Open M-F 9:00am to 5:00pm Pacific

Free shipping on most orders!

Camburg Ford Raptor Lower Control Arm # CAM-110098

Camburg Ford Raptor Lower Control Arm Kit # CAM-110098. This lower arm is fabricated from steel and is 100% and was designed using the same geometry and width as the factory Ford lower arm. It will work with factory Ford wheels and those offered by KMC, Method, Pro-Am, and others. This is an affordable suspension upgrade for your Raptor that provides a number of benefits. Increased strength, limit strap mounts, jacking point, and more. Keep reading below for more information...
SKU: CAM-110098
Sign up for price alert
Only 1 left

Availability: In stock

Regular Price: $1,895.95

Sale Price $1,845.95

  • Camburg Engineering

    Safe, Secure, Trusted Seller



    Camburg Engineering # CAM-110098. This Fabricated Steel Lower Control Arm is designed to fit 2010, 2011, 2012 and 2013 model year Ford RAPTOR SVT trucks only! Upgrading your factory lower arm to this Camburg provides you with a number of benefits. First of all, the Camburg arm is stronger. Because it is built using steel you have the option of running a Hydraulic or "Air Bump" style bump stop. Camburg features a Limit Strap mounting location (limit straps not included) that allows you to limit the down travel via the straps. This Camburg Lower Arm was designed in CAD and features internal gussets and tabs that create a considerably stronger part than the factory cast Aluminum arm. Camburg arms feature a Grey powder coat finish and include all the hardware and spacers necessary for installation.

    Camburg knows that their customers expect the best. That is why these lower control arms pivot on Aurora 1" PTFE lined uniballs at the frame rather than inexpensive rubber bushings that bind and flex under braking. Camburg also uses an FK Bearing PTFE lined 1.50" uniball at the spindle for maximum strength and articulation. The factory ball-joints can limit travel and lack the strength and reliability necessary for serious off-road use. No modifications to the spindle are necessary because Camburg includes machined heat-treated stainless steel mis-alignment spacers that allow the larger diameter uniball to mate perfectly with the factory tapered holes where the ball-joint would normally attach. Camburg includes Mil-Spec 21250 NAS 12 point aircraft bolts that attach the 1.50" uniball to the uprights. These bolts are rated at 180,000 psi minimum tensile strength and 108,000 psi minimum shear strength. You cannot find a stronger or higher quality bolt for this application. Each bolt has a specific shoulder and grip length to ensure maximum strength is achieved in the assembled product. The bolts used in this Lower Arm Kit provide higher tensile and shear strengths compared to Grade 8, 9 or even 12.9 bolts.

    Camburg knows that most Raptor owners want the ability to keep their factory front sway bar. For that reason Camburg includes a provision that allows the factory sway-bar to be run but it requires the purchase of the Camburg Sway-Bar End Link Kit # CAM-110114. Please note that the Camburg Sway Bar End Link Kit is not included and must be purchased separately. You can purchase this item using the selection box located next to the ADD TO CART button.

    Camburg has been involved in professional Off-Road racing for decades. They know that flat tires and repairs are a reality when a vehicle is driven off-road. For that reason Camburg designed an integrated jack point that is located on the bottom side of the arm. This jacking point provides a safer and more secure lifting point that is especially helpful on off camber terrain. Combine this with our 1.50" uniball upper arms and FOX 3.0 coilovers for the ultimate Raptor suspension.

    CAM-110098 Features:
    Made in the USA 1.00" and 1.50" uniballs
    Mil-Spec NAS 12 pt bolts
    Boxed construction internally gusseted
    Ability to run hydraulic bump-stops
    Tabbed for limit straps
    Integrated jack point underneath
    Ability to run factory sway-bar

    For more information on this or any other Camburg Engineering product please click on the ASK A QUESTION link located at the very top of this page.

    This item ships for FREE via Standard Ground Service to all 50 United States of America!

    Additional Info

    Additional Info

    Free Shipping Free Ground Shipping!
    Vehicle Make Ford
    Vehicle Model F150 Raptor
    Part Number CAM-110098
    UPC N/A
    Vehicle Year 2013, 2012, 2011, 2010
    Manufacturer Camburg Engineering
    Material Type Steel
    Made In the USA Yes


    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    You may also be interested in the following product(s)