Tubular offset, extended radius arms allow full turning radius with the use of a 14-1/2 wide tire mounted on wheels with 3-3/4" backspacing. The 46" long arms have fully gusseted side plates, allowing 10 inches of front wheel travel to eat up the toughest of terrain! The Cepek systems are the only kits available with extreme duty radius arm pivot brackets replacing the wimpy stock brackets to fully anchor the radius arms to the frame. The Dick Cepek Series II Ford F-150 and Bronco lift is known throughout the industry as one of the finest Ford Twin-Traction Beam lifts available. While other Ford lifts are nearly impossible to properly align, a Dick Cepek equipped lifted vehicle is quick and easy to align. The 4" system is supplied with 4 lift Maxi-ride coils and an extreme duty dual position bracket system. This dual position bracket system allows the 4 system to be upgraded in the future to a 6 lift simply by adding new Dick Cepek 6" Maxi-ride lift coils. So if you ever plan on going bigger and want to install a 6 lift coil youll be ready to go. The beefy I-beam axle drop down brackets can accomodate both height lift coils, 4 or 6 inch coil height. The Series II system is designed and built with the hardcore offroad enthusiast in mind. All Dick Cepek F-150 and Bronco 4" lift kits include a 2.5" rear block and u-bolt kit.

Please note: Dick Cepek Series 88 shocks are included with this kit. For those customers with the factory Quad Shock option you will need to purchase two additional shocks, these are NOT included in the kit and must be purchased separately.

If you would like additional information on this or any other Dick Cepek product pleaes click on the "ask a question" at the very top of this page.