Tubular offset, extended radius arms allow full turning radius with the use of up to a 14-1/2" wide tire mounted on wheels with 3.75" inches of back space. The 46" long arms have fully gusseted side plates, allowing 10" inches of front wheel travel to soak up the toughest of terrain and to help keep the tires firmly planted when crawling up the roughest of trails! The Cepek systems are the only kits available with extreme duty radius arm pivot brackets replacing the wimpy stock brackets to fully anchor the radius arms to the frame. Other manufacturers provide an aftermarket radius arm bracket, but nobody offers one as strong as the Dick Cepek Series II version. The Dick Cepek Series II Ford F-150 and Bronco lift is known throughout the industry as one of the finest Ford Twin-Traction Beam lifts available. While other Ford lifts are nearly impossible to properly align, a Dick Cepek equipped lifted vehicle is generally quick and easy to align. The 6" system is supplied with 6" lift Maxi-ride coil springs and an extreme duty dual position bracket system. This dual position bracket system allows the 6" lift system to easily be reduced to a 4" lift by adding a new Dick Cepek 4 Maxi-ride coil springs and shorter shock absorbers. The beefy I-beam axle drop down brackets can accomodate both height lift coils, 4" or 6" inch coil height. The Series II system is designed and built with the hardcore offroad enthusiast in mind. For those Series I owners looking to upgrade your kit to the Series II level PerformanceLifts.com offers upgrade kits. All Dick Cepek F-150 and Bronco 6 lift kits include a 4" rear block and u-bolt kit.

Please note: Dick Cepek Series 88 shocks are included with this kit! If you have the factory Quad Shock option you must purchase two additional shocks, Quad Shocks are NOT included with this kit. For more information please click on the "ask a question" link located at the very top of this page.