|
California SuperTrucks 1999+ Silverado and Sierra 1500 2wd Fabricated 4" lift spindle is simply the best made spindle on the market! The CST 4" lift spindle fits all 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006 Chevrolet Silverado and GMC Sierra 2wd 1500 series trucks! This spindle also fits the 2007 Silverado Classic model. The CST spindle is more expensive than other spindles but its worth it when you consider what you are getting! CST quality is known throughout the industry as THE BEST! GMs all-new Silverado and Sierra took the truck world by storm back in 99, and California SuperTrucks was on the leading edge when it came to the development of performance off-road suspension systems for the Generals 2WD haulers. California SuperTrucks intrinsic knowledge of GMs latest front suspension layout enabled their engineers to create the best riding suspension system available for the new GM trucks: the SuperTrail S2 Spindle Lift. By retaining the stock coilsprings CST is able to maintain a stock like ride that is excellent for those that really rack up the freeway or highway miles. Need more than 4" of lift? Good news, you can easily and safely add a 1" or 2" lift Daystar urethane spring spacer and put together a complete 5" or 6" suspension lift for around $900.00 bucks! If money is really tight this spindle lift has the ability to retain the stock front shocks too! Please note that shock absorbers are not included with the $649.00 spindle price. All shocks are purchased separately and are available from the drop down selection boxes below. If your budget allows, PerformanceLifts.com recommends the stock shocks be replaced when installing the CST spindle lift. The stock shocks are not designed to control the added weight of larger wheels and off-road tires and the ride factory shocks provide proves this. A performance shock absorber will considerably improve the handling and ride of a lifted vehicle. PLC recommends the CST Performance Suspension CSR series shock absorbers for use with this kit. Spending a little more money on shocks might seem like a waste, but trust us, its actually money very well spent! Even if you never take your truck off-road, purchasing a performance shock absorber will give a very good ride. The rear of your Silverado or Sierra 1500 is lifted using a simple and reliable block and u-bolt kit. PerformanceLifts.com offers all sorts or different rear block heights that allows you to get your truck sitting exactly how you want it to. A 2" rear block kit will level most Silverado or Sierra trucks with the 4" spindle lift installed up front. Some customers may want to consider a 3" rear block if they prefer the rear of their truck to sit ever so slightly higher than the front. When running the 5" or 6" combined lift (spindles and urethane spring spacers) a taller 3" or 4" block height is required to level the truck. Please Note: Wheels must not have more than 4.50 inches of back space. Stock wheels will NOT work with these CST lift spindles! THIS IS A HAND FABRICATED 4" LIFT SPINDLE - PLEASE NOTE THIS CST 4" LIFT SPINDLE IS DESIGNED AND BUILT TO OUTLAST YOUR TRUCK! DO NOT CONFUSE THIS SPINDLE WITH THE INEXPENSIVE CAST SPINDLE OFFERED ELSEWHERE. This spindle is also used in the CST 7" suspension lift kit. For this reason CST uses a larger than stock ball-joint taper with this spindle. What does this mean to you? It means if you plan on running this CST 4" spindle with your stock upper control arms you will need a pair of CSTs ball-joint taper sleeves. This taper sleeve is available for purchase below. It also means if you want to add a CST upper control arm kit later on down the road you can! These spindles are 100% compatible with the CST 3" lift upper control arm and coil spring lift kit! If you have any questions or require more information please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service!
|
