|
4wd Ford Owners - You Asked For Them... You Got Them! These are genuine Dick Cepek radius arms for use with the 1980 through 1996 4wd F150 and Bronco. These radius arms are much longer and much stronger than stock. Longer radius arms will help increase wheel travel and improve the on and off-road ride of the Twin Traction Beam front end found on the 4wd F150 and Bronco. Increased wheel travel is great for off-roaders looking to improve their rigs flex capability and will help keep the tires on the ground where they belong. These radius arms are an excellent addition to any existing Series I 4" or 6" Dick Cepek kit... and can also be used with most popular F150 and Bronco lift kits. This radius arm kit includes a pair of Dick Cepek heavy duty extended radius arms, heavy duty radius arm mounts, all necessary hardware, and instructions. Bushings are NOT included as the stock rubber bushings are re-used with this kit. If your current bushings need replacement PerformanceLifts.com suggests using factory Ford rubber replacements instead of the urethane bushings offered by aftermarket suppliers. The more pliable rubber bushings will allow the radius arms to flex more than the urethane bushings and rubber also transmits less vibration into the chassis. This is one area where the added stiffness of urethane is not generally needed. Off-roaders that are looking for more wheel travel will also find that rubber bushings will not limit rebound travel like a urethane bushing will. If you have any questions please click on the "ask a question" link located at the very top of this page.
|
