|
CLEARANCE ITEM - NO RETURNS OR EXCHANGES! Fox 980-99-024-A Fox Racing Shox have been used on winning off-road racing vehicles since the 1970s. With hundreds of class victories and thousands of hours of off-road use, its no wonder Fox Racing Shox is considered one of the best builders of performance shock absorbers on the planet! Fox has put over 25 years of off-road racing and shock building experience into these shocks and it shows. The Fox 2.0 series are completely rebuildable and allow for fine tuning which means these shocks are quite possibly the last set you'll ever need to purchase for your vehicle. Features:
* Special Smooth-Bore seamless alloy steel body
* A high-flow, large bore, damping piston and utilizes the highest quality valve shims available
* Nitrogen gas pressurized to 200psi
* Teflon lined steel spherical bearings
* Hard-chrome steel shaft
* Billet aluminum end-caps and eyelets
* Fully rebuildable & revalvable Fox 980-99-024-A Specifications:
Extended Length: 22.80" Inches
Compressed Length: 14.30" Inches
Travel: 8.5" Inches
Shaft Diameter: 5/8" Inch
End Cap Finish: Blue Anodizing
Series: Fox 2.0 Emulsion As the shock absorber is exposed to exessive heat it will fade and/or fail. If you are experiencing excessive shock failure or fading, it may be time to step up to the performance of a Fox 2.0 series shock absorber, or possibly add another shock. By adding another shock, you are spreading the work load from one shock to multiple shocks. Increased cooling capability will be achieved from the following factors: Decreased Friction: When you use a multiple shock set up, lighter valved shocks can be used which will decrease friction. Increased Oil Capacity: The more oil, the better. Higher oil volumes take longer to heat. These 8.5" travel shocks are an Emulsion series shock that utilize an internal reservoir. For more information on this or any other Fox Racing Shox product please click on the "ask a question" link located at the very top of this page.
|
