|
GMs venerable C1500 full-size truck is a stylish and rugged performer, heavily supported by the aftermarket, which means there are lots of goodies available to trick-out these haulers. For C1500 and C2500 light duty 2WD trucks, Fabtech designed a vast range of systems from their spindle system to the Ultimate long travel system. This Fabtech FTS1588-7 4" lift spindle design provides the simplest installation with the least amount of control arm modifications. This 4" spindle kit is a terrific choice for all-around performance and for those looking to gain height without sacrificing ride quality. By retaining the stock coilsprings, the ride will remain very similar to stock. The Fabtech FTS1588-7 spindles are designed to fit all 1988-98 C1500 and 88-99 C2500 light duty trucks. The FTS1588-7 will also fit most Chevrolet and GMC SUVs, including the 2wd Blazer, Tahoe, Suburban, and Yukon. The FTS1588-7 provides a full 4" of front end lift and increases ground clearance by four inches over stock! To level the vehicle PerformanceLifts.com suggests a 2" or 3" block be used. For those looking to give their Silverado or Sierra a prerun look a shorter 1" block is also available. To complete the installation PLC suggests purchasing aftermarket shocks and a rear block and u-bolt kit. All of these items are available separately below from the drop down boxes located beneath this item description. The shocks, blocks, and u-bolts shown in the item picture are NOT included in the base price and must be purchased separately. Wider than stock tires cannot be installed on OEM wheels as they will rub the top of the spindle. Aftermarket wheels with a maximum back space of 4 3/4" are recommended. Maximum tire size suggested for use with this 4" lift spindle is a 32x11.5R15 on a 15x8" wheel. For more information please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service!
|
