|
Fabtech Motorsports part number FTS213. The FTS213 is designed to lift the rear of a Jeep XJ 1.5 inches. The Fabtech FTS212 add-a-leaf consists of two individual leafs that are added to the existing rear leaf spring packs. One add-a-leaf is installed in each factory spring pack. Installation of the FTS213 requires removal and disassembly of the stock spring pack, adding the Fabtech add-a-leafs to the existing spring pack, and then re-assembling and re-installation of the spring packs. The amount of additional rear lift you will receive will vary. On a stock Jeep Cherokee XJ with no aftermarket accessories the FTS213 will provide approximately 1.5 inches of lift. The FTS213 also does firm up the rear ride by increasing the spring rate. Fabtech Add-a-leaf kits do not however increase the load capacity of a vehicle! This FTS213 Add-A-Leaf kit may help reduce the amount the rear of your SUV sags down when towing or hauling a heavy load but they DO NOT INCREASE THE FACTORY SPECIFIED LOAD CAPACITY! For more information please contact Info@PerformanceLifts.com
|
