|
Fabtech FTS2588-7 C2500 2wd 4.5" Lift Spindles! These FTS2588-7 4.5" lift spindles are an affordable way to level out the 1992-1999 3/4 and 1-ton Chevrolet and GMC 2wd trucks and SUVs. These spindles are a direct replacement for the stock spindles on your 3/4 ton and 1-ton truck or Suburban and are easy to install. Even better, should you wish to return the vehicle to stock its just a matter of removing the Fabtech spindles and re-installing your factory spindles. The spindles are also great because they provide lift while retaining the stock ride. By leaving the springs and control arms alone you retain the stock spring rate and suspension travel. This is the best riding and most affordable 4.5" lift available for the C2500 trucks and SUVs! To complete this spindle lift PerformanceLifts.com suggests purchasing either the 2 or 3 rear block and u-bolt kit, available separately below. These spindles will fit the C3500 vehilcles but may require special rear u-bolts. At this time PerformanceLifts.com is unable to guarantee correct u-bolt fitment due to variations in the GM line of trucks. If you own a C3500 vehicle these spindles will work but the rear u-bolt kit may not. Kit Footnotes:
Fabtech suggests the use of 33/12.50R16.5 tires with 16.5x8.25 wheels with no more than 4-5/8 inches of backspacing (minor trimming may be required). These Fabtech Motorsports FTS2588-7 spindles fit 8-lug vehicles only! For more information please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to all addresses located in the lower 48 United States of America!
|
