|
This Fabtech Motorsports 6" suspension lift system is designed for use on all 2003 and 2004Hummer H2 vehicles equipped with the air bag rear suspension. Unfortunately this kit will not fit 2005 and 2006 model year H2's because of the non-adjustable rear ride height sensor GM is now using. This Fabtech H2 suspension lift kit will allow you to run a wide range of larger than stock tire sizes, up to a 38x15.5R18 tire on a 18x10 wheel with 5.00 inches of back space. Customers that want to run 20" diameter wheels are advised to run a 37" diameter tire on a 20x10" wheel with 5.00 inches of back space. Please note, running a 38" diameter tire on the H2 will require minor trimming. This Fabtech H2 system is constructed much like all of the Fabtech GM IFS systems and includes extended length steering knuckles and high clearance crossmembers, but the differences stop there. To properly address the H2's fulltime transfer case Fabtech also includes a replacement CV style front driveshaft that ensures proper driveline operation. Also unique to this particular Fabtech suspension lift is the use of two 1/4" thick steel skid plates, one for the front differential and one for the transfer case. Rear lift on coil spring models receive replacement coil springs that are driver and passenger side specific. Make sure that you are purchasing the correct kit for your H2. There are two different rear suspension designs used on the H2, coil spring and air bag, this is the AIR BAG system. Please note:
This item is now available only in BLACK. The Blue kit shown is for promotional reasons only. Item Includes:
FTS27003BK - Front Box Kit 1 of 2
FTS27004BK - Front Box Kit 2 of 2
FTS27006BK - Rear Air Bag Kit This lift system requires replacement shock absorbers, these are NOT included with the base kit. If you wish to run Fabtech shock absorbers with this kit you must purchase them separately. This is done using the drop down selection boxes located directly below this item description. PerformanceLifts.com does not include Fabtech H2 shock absorbers with this kit because many customers prefer to run higher performance front and rear shocks. For more information on this or any other Fabtech Motorsports product please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to any address located in the lower 48 United States of America!
|
