|
This Fabtech Motorsports performance 3" suspension lift kit is designed for all 1997-2004 2wd Dodge Dakota and 1997-2003 Durango vehicles! This 3" lift kit works with both the 2wd Dodge Dakota and 2wd Dodge Durango and fits all cab and engine combinations too. With four different cab configurations and four motor options, designing a 2wd Dodge performance system was no easy task for Fabtech. Fabtech once again assembled the proper combination of upper control arms and coil springs to achieve an outstanding suspension system. This 3" lift kit includes new tubular upper control arms, upper control arm bushings, new upper control arm ball joints, a pair of 3" lift coil springs, low profile bump stops, and a 1.5" lift rear add-a-leaf kit. Shock absorbers are necessary to complete the kit and they are NOT included but are available for purchase below. This Kit Includes The Following Items:
FTS3100-X - Fabtech 3" Lift Coil Springs
FTS3100-6 - Fabtech Upper Control Arm Kit
FTS203 - Fabtech Rear Add-A-Leaf This Fabtech 3" kit provides enough room to clear a 31x10.50xR15 tire when mounted on a 15x7 or 15x8 wide wheel with 3-3/4" backspacing. For customers with factory 16" wheels, a 31" diameter or metric equivalent tire size is recommended. When combined with the 1.5" rear add-a-leaf lift, the 3" front kit helps to level most Dakotas and Durangos for a much better appearance. Please Note: When running a 31" tire slight trimming may be required. Stock wheels will NOT work with this kit. For customers that wish to retain their factory wheels a 1.25" thick billet adapter is required. These spacers are available for purchase below and are only required for the front wheels. No returns are allowed on the billet wheel adapters! For more information please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to all addresses located in the 48 contiguous United States of America!
|
