|
This Fabtech FTS424-1BK 3.5" spring hanger lift fits all 2001-2004 Ford F250 Super Duty and F350 Super Duty trucks and Excursion SUV models. The FTS424-1BK works with all engine, transmission, cab and bed configurations. Yes, this kits fits the 5.4L V8, 6.8L V10 and the 6.0L and 7.3L Powerstroke Diesel equipped vehicles! This Fabtech 3.5" lift kit only works on 4x4 models! With these Fabtech spring hangers you can easily obtain 3.5 inches of front lift without changing the front leaf springs or factory ride quality. The super stout spring hangers replace the factory units and require no welding or cutting to install. The front frame crossmember ensures that the front end stays as strong as Ford engineers intended it to be and the bumper brackets make sure everything aligns and re-installs as it should. FTS424-1BK Kit Contents:
3.5" Lift Front Spring Hangers
Front Frame Crossmember
Bumper Brackets This kit does NOT include shock absorbers or a rear lift. PerformanceLifts.com strongly recommends the Bilstein shock absorbers for use with this kit. The Fabtech shocks are not as smooth riding as the Bilstein and do not have the design or construction quality that Bilstein does. If you want the best shock for your money you cannot beat the Bilstein! Fabtech sells these spring hangers without a rear lift. If you wish to also raise the rear of your Super Duty or Excursion and dont know what block or u-bolt kit is right for your vehicle we ask that you please follow these simple steps. Decide how you want your vehicle to look when its lifted. Do you want the vehicle level? Slightly higher in the front? Higher in the rear? The easiest way to calculate how much rear lift you require is to take some measurements of the vehicle as it sits right now. If the front of your Super Duty is currently 2 inches lower than the rear and you want to build a LEVEL truck you will need a 1.5" rear block. If you want the truck to have the same stance, just lifted, youll want either the 3" or 4" block. Some Powerstroke vehicles are almost 3 inches lower in the front and require almost no rear lift to sit nearly level. Most Ford Excursion vehicles sit about 1 to 1.5 inches lower in the front and generally require more rear lift to sit level than a Super Duty truck. Most Excursion owners are happy with a 2" rear block installed. We suggest you measure your vehicle to ensure you end up with the look you want. PerformanceLifts.com will select the correct rear U-bolt and shock absorbers based on the vehicle and block height you select. All you need to do is select the shocks you want and we'll take care of the rest. For those customers looking to get the front axle precisely located under the vehicle you will want the adjustable track bar. Without the adjustable track bar the front axle will be shifted slightly to one side of the vehicle. All of the items necessary to put together a complete Fabtech 3.5" lift kit are available by using the drop down boxes located below this item description. If you have any questions please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to all addresses located in the lower 48 United States of America!
|
