|
These PRG Upper Control Arms are built using chromoly tubing and feature a Teflon-lined uniball for the outer pivot and nylon lined inner heim-joints. The Teflon and Nylon liners help to provide quiet and smooth operation. And PRG uses stainless bushings instead of squeak and wear prone urethane. Each UCA inner pivot is adjustable to help fine tune any alignment issues you may have. The PRG Upper Control Arms come powdercoated gloss black. Each arm comes pre-assembled and pre-adjusted to factory specs. This makes installation as easy as possible. Installation of these arms requires basic hand tools and takes about an hour (this is a 100% bolt on product!). These PRG Upper Control Arms are not designed to provide additional lift by themselves. In otherwords, adding this arm by itself will not give you more lift. This arm is designed to allow you to get additional height from an aftermarket spacer or coilover and prevents the upper arm from hitting the coil bucket. These arms can also be used with a CST, Fabtech, ProComp, or Rancho subframe kit and a lift spacer (or adjustable coilover) to achieve additional height. This arm is also a very good upgrade if you frequently take your Titan off-road. The factory upper control arm has a nasty habit of cracking when the truck is abused off-road. Don't wait until it's too late, if you abuse your truck spend the $$$ and prepare it well and it won't leave you stranded out in the boonies. This UCA fits all 2004, 2005, 2006, 2007, 2008 and 2009 model year 2wd and 4wd Nissan Titan pickup trucks! This item ships for FREE via standard ground service to any address in the United States of America - Hawaii and Alaska included!!!
|
