|
This Rancho Suspension RS6559B 4" suspension lift kit is designed for use on Chevrolet Colorado and GMC Canyon 4x4 and Z-71 model 2wd trucks equipped with the automatic transmission. This item also fits vehicles equipped with the factory Off-Road package. This is VERY IMPORTANT... so READ THIS --> This RS6559B kit will NOT fit any manual transmission or All-Wheel-Drive models. Again, if your Colorado or Canyon has a manual transmission, this kit will not fit. If your Colorado or Canyon has factory All-Wheel-Drive, this kit will NOT fit. This lift will fit models equipped with a torsion bar suspension. If your Colorado or Canyon has a coil spring equipped front end this kit WILL NOT FIT! The off-road suspension experts at Rancho offer one of the nicest 4" suspension systems available for the 2004, 2005, 2006, 2007 and 2008 Chevrolet Colorado and GMC Canyon 4WD & 2WD Z71 models. This system offers exclusive features which eliminate unnecessary installation steps, resulting in a faster and easier installation. The Rancho/Realift torsion bar relocation technology mounts without drilling, eliminating the need to relocate the factory torsion bar cross member. The two piece 1/4" thick cross member comes with new OE control arm bushings installed. Combined, these features preserve ground clearance and make for a hassle free installation. Even better, steering integrity is uncompromised by maintaining the stock location of the factory rack and pinion steering. This, along with the new CNC machined steering knuckles; maintain optimal steering geometry preserving OE caster angles. Additional Features
Front differential drop brackets correct pinion angle for minimized driveline vibration
Maintains factory location of rack & pinion
Preserves OE geometry for easy alignment, minimal bump steer, and optimal ride & handling (maintains OE Caster)
Two-piece 1/4" thick cross member comes with the rear control arm bushings installed.
No welding required.
No drivetrain or exhaust modification.
Allows up to a 305/70/16* Tire
Rancho/Realift technology for no torsion bar relocation results in increased ground clearance.
Extended (bolt-on) CNC machined steering knuckles.
Allows for reuse of the OE front skid-plate
Includes rear spring hanger brackets and lift shackles Rancho is leading the way with easy installation, precision cut components and the industry's highest quality. Experience the Rancho difference and uncompromising performance both on-road and off. Rancho is dedicated to offering you the finest engineered, highest quality products. Please Note: This kit does not include shock absorbers. Shocks must be purchased separately and are available using the drop down selection boxes located beneath this item description. To complete this kit you must purchase Rancho's longer extended length front and rear shocks. Factory shocks will not work with this lift. Please note that the correct rear shocks are driveshaft type specific. Please be sure to select the type of rear driveshaft your truck has to ensure you receive the correct rear shock absorbers. A magnet will stick to the steel driveshaft and not to the aluminum one. If you have any additional questions we urge you to click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to any address located in the contiguous 48 United States of America!
|
