|
The Skyjacker C9461K 3" suspension lift kit is designed to offer truck owners another option. For years customers have been asking for a 3" suspension lift kit that doesnt involve cranking the torsion bars... well here it is! This Skyjacker C9461K 3" lift kit will raise the front of your Silverado or Sierra K1500 series 1/2 ton 4x4 pickup truck an honest three inches without affecting the ride quality. This new Skyjacker suspension lift kit allows for a full 3" of lift without cranking up the torsion bars. This allows you to keep the factory ride quality and handling characteristics and still have room to clear a larger tire. Skyjacker’s precision-engineered steering knuckles allow for the upper control arms to remain in the factory position. The front differential is lowered using Skyjacker’s 3/16" thick differential brackets. Skyjacker’s design also leaves the upper differential mount in tact, this allows you to return the vehicle to stock should the need ever arise. The Skyjacker C9461K 3" lift kit allows the use of 285/75R16 tires on 16" wheels or 285/70/17 tire on 17" wheels. Other tire and wheel combinations will work, however the maximum tire diameter Skyjacker recommends is around 32" and the maximum tire width is around 11.50 inches. Please note, this kit will work with OEM wheels! Wheel back space must not exceed 5.00 inches! The C9461K kit raises the front of the Silverado and Sierra 3" inches and lifts the back 2" inches using taller lift blocks and extended length U-bolts. Please note that if your vehicle is equipped with AutoRide shocks you must also purchase the C93AR bracket kit, not included but it can be purchased separately below. For additional information please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to any address located in the contiguous 48 United States of America!
|
