|
The WARN 9.5ti Thermometric provides 9500 pounds of pulling capacity. Its alloy housing is sealed at key points for superior water and environmental resistance and provides a shield for the motor wiring. High gloss, chip resistant powder coat finish over chromate coating provides excellent corrosion resistance. Adding to the new winch design is a new indexed connector for the hand-held remote control and an easy-to-use clutch lever. Internally, the 9.5ti Thermometric winch features the WARN exclusive multi-segment CAM actuated brake, a new Gen II Bosch motor and a rugged 3-stage planetary gear train reduction system. A premier WARN feature is the new motor-mounted thermal sensor which relays instantaneous temperature information to the hand-held winch remote to provide operator feedback while the winch is in operation. This helps prevent winch motor damage during extended periods of use. Warn strongly recommends your battery have a 650 CCA minimum rating when operating this winch. Product Features:
Rated line pull: 9500 lbs. (4310 kgs.) single-line
Remote Control: Remote switch, 12 (3.7m) lead
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Wire rope: 125, 5/16 diameter (30m, 8mm diam.)
Fairlead: Roller
Battery leads: 2 gauge, 72 (1.83m)
Finish: Chromate with high-gloss powder coat Product Specifications:
Part Number: 67550
Motor: Gen II, Series Wound
Geartrain: 3-Stage Planetary
Gear ratio: 156:1
Drum diameter/Length: 2.5/9.0 (6.4cm/23cm)
Lubrication: Aeroshell #17
Weight: 89 lbs. (36.3kgs.)
Nuts/bolts: PN 39625 For more information please contact Info@PerformanceLifts.com Free UPS Ground Shipping!
|
