Shopping Cart Contents...
This CST Performance Suspension 7" lift system is designed for use with all 2006, 2007, and 2008 model year 2wd Dodge Ram 1500 trucks (except Mega Cab). This CST lift will fit all engine sizes and all cab configurations and bed lengths. The CST 7" Front Lift consists of a pair of CST 4" Lift Spindles, CST 3" Lift Coil Springs or CST 3" Lift Coil Spring Spacers, and a set of DOT Approved Extended Length Front Brake Hoses. The rear suspension is raised using either a 3" or 4" Lift Block and Extended Length U-Bolt Kit. All necessary installation hardware and instructions are included.
CST now offers two different 4" Lift Spindles for the 2009+ Ram 1500 2wd trucks. The only difference is the material type used to produce them. The CSS-D1-1 Spindles are Fabricated in the USA by CST using 1018 Sheet Steel and are the strongest Race Style spindle CST offers. New from CST are the CSS-D1-5 Spindles that are also built in the USA but are Cast Iron and slightly less expensive than the Fabricated Steel Version. Both of the CST Ram 1500 2wd 4" Lift Spindles are built in the USA and are stronger than the OEM parts they replace.
Most Ram owners achieve a level stance with the 4" rear block kit. We also offer a 3" rear block height for customers that want the Prerunner, Bulldog, or Cali Lean stance. We suggest you measure and eyeball the difference between front and rear height (on level ground) and use that to help select the correct block kit. Some customers ask why is the rear only lifted 3 or 4 inches when the front is lifted 7 inches? Simple, the Dodge Ram 1500 2wd trucks come from the factory with the front end MUCH lower than the rear. By lifting the front suspension more than the rear we can achieve a level truck. To ensure you purchase a complete and ready to install 7" lift kit you must select your desired rear lift block height and the type of shock absorbers you want using the selection boxes located above this item description.
Tire & Wheel Info:
This lift is not designed for use with stock 17" wheel and larger than stock tires. Factory 20" wheels can be used but the tire width should not exceed 12" inches or 305mm. The CST 7" Lift Kit is designed to run up to a 35" or metric equivalent diameter tire when mounted on an 8" to 9" wide wheel. If running 17" diameter wheels the back space should not exceed 5.25" inches! When running larger diameter wheels the back space tolerance does allow for wheels with more than 5.25" inches of back space to be used. Please contact PerformanceLifts.com for additional information.
Please read this! Due to the design of the 2006, 2007 and 2008 Ram 1500 2wd suspension this lift requires the installation of an extended length front brake hose. A pair of DOT approved braided stainless steel hoses are included with this lift. This is why the CST 7" lift for the 2006-2008 Ram 1500 2wd is more expensive than for the 2002-2005 model year trucks. Please also not that the use of the correct length front shock absorber will prevent the aluminum upper control arm from knocking against the top of the steel frame rail. The front shock acts as a suspension travel limiting device and running a shock that is considerably longer in the extended length than the stock shock is not recommended. For this reason CST highly recommends the use of their CSR Series Performance shock absorbers (or shocks with an equivalent length) with their CST 7" suspension lift kit.
THIS KIT FITS DODGE RAM 1500 2WD TRUCKS ONLY!
If you dont see a shock or lift combination that suits your needs, please let PerformanceLifts.com put together a custom lift package for you! Simply click on the "Ask A Question" link located at the very top of this page and let us know how we can help you put together the exact lift package that you want.
This item ships for FREE via standard Ground Service to any addresses located in the 48 contiguous United States of America!
|Free Shipping||Free Ground Shipping!|
|Vehicle Model||Ram 1500|
|Vehicle Year||2008, 2007, 2006|
|Drive Type||2-Wheel Drive|
|Made In the USA||Yes|