CST & ICON 2007-2016 Tundra 7" Lift Package
UPDATED: This kit has been verified to fit all 2007 - 2015 models!
This CST Performance Suspension Lift System includes a pair of full length ICON 2.5" Body coilovers and ICON 2.0 Series rear shock absorbers. With this lift package you can achieve between 7" inches and 8" inches of true front suspension lift depending on how the ICON coilover is adjusted. CST includes a rear lift block that will raise the rear approximately even with the front when the front has been adjusted to provide 7" inches of lift over stock height. If you will be running the CST lift adjusted to 8" inches of lift over stock height we offer the ICON Expansion Pack as an upgrade that will provide 1" of additional rear lift to help get the truck close to level. The track width increase is minimal with the CST suspension lift design but factory wheels will NOT work unless wheel spacers are installed. This CST lift is proudly made in the USA by skilled men and women! Keep reading below for more information...
| Brand | CST Performance Suspension |
|---|---|
| Manufacturer | CST Performance Suspension |
| Part Number | CSS-T3-3CP |
| Vehicle Year | 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007 |
| Vehicle Make | Toyota |
| Vehicle Model | Tundra |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
This CST / ICON Suspension Lift Package # CSS-T3-3CP is designed to fit all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 and 2015 model year Toyota Tundra 2wd and 4x4 trucks. Yes, this high clearance crossmember design will also fit 4x4 models! The CSS-T3-3 Suspension Lift is designed to lift the front of the Tundra by 7" inches and will allow the use larger than stock tires. This lift will clear most 35" tires and with trimming can clear a 37" tire on the correct size wheel. Please note that 20" or larger diameter wheels will be required when installing this lift system.
Features & Benefits:
This CST 7" lift includes a set of fabricated steering knuckles built using 1/4" plate steel. Lesser quality kits include cast iron knuckles that are both heavier and weaker than the CST design. If you are looking for the strongest suspension lift available for your Tundra this kit is for you! The majority of the CST components are fabricated from sheet steel and CNC machined parts, welded by hand, and finish machined to ensure it's going to fit right the first time. Because this package includes a pair of ICON 2.5" Body adjustable coilovers a wide range of suspension lift height options are possible.
Tire & Wheel Fitment:
This CST 7" Lift will require the use of an aftermarket wheel that is at minimum 20" inches in diameter. CST recommends that wheels have no more than 5.00" inches of back space. The stock Toyota Tundra wheel has too much back space and will NOT work with this CST lift. You, the owner, must ensure your tire and wheel combination have sufficient clearance before operating the vehicle!
Lift Package Contents:
CST 7" Suspension Lift
ICON 2.50" Body Adjustable Coilover (pair)
ICON 2.00" Body Rear Shock Absorber (pair)
If you have any questions please let us know. Simply click on the "ASK A QUESTION" link located at the top of this page.
This item ships for FREE via ground service to any address in the 48 United States of America!
| Brand | CST Performance Suspension |
|---|---|
| Manufacturer | CST Performance Suspension |
| Part Number | CSS-T3-3CP |
| Vehicle Year | 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007 |
| Vehicle Make | Toyota |
| Vehicle Model | Tundra |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
