Fabtech 2019+ Ram 1500 6" Lift Kit - Dirt Logic Series # K3087DL

Fabtech 2019+ Ram 1500 4x4 Performance Series Dirt Logic 6" Lift System # K3087DL is designed to fit the recently updated 2019 model year Ram 1500 trucks. With an additional 6" inches of vehicle suspension ride height you can clear up to 37" tires with minor trimming. This Fabtech Dirt Logic system is designed to improve the on and off-road capability of your Ram by replacing the stock shocks with a set of Dirt Logic Coilovers (front) and Dirt Logic 2.25 shocks (rear). The Fabtech Performance System includes Fabtech’s legendary stainless steel Dirt Logic 2.5 Coilover shocks for outstanding damping capacity with a superior highway ride. Rear shocks include the Dirt Logic 2.25.

Vehicle Fitment Information:
For coil spring suspension trucks only - WILL NOT FIT AIR RIDE MODELS! Fabtech designed and built this 6" lift using the standard height Ram 1500 4x4 truck. Due to differences between the 2wd and 4x4 trucks this Fabtech lift will NOT fit any 2wd model Ram 1500. This lift will NOT fit the 2019 Classic edition Ram 1500 trucks built on the older chassis. If your Ram 1500 4x4 has the factory installed Off-Road Package (+1" lift from the factory) your actual lift height increase with this Fabtech lift will be closer to 5" inches over your current lift height. This is because you will be replacing the factory front shock and spring assembly with the Fabtech coilover. Installation of the Dirt Logic 2.5 coilover eliminates the +1" lift height increase the Off-Road package equipped trucks have.

Ram 1500 Rebel Information:
Yes, some of our Ram 1500 Rebel edition customers are installing this lift on their Rebel edition Ram 1500 4x4 trucks. Doing so will result in a lift height increase of approximately 4" inches over the factory Rebel +2" lift height. This is because the Fabtech Dirt Logic 2.5 series coilover replaces the factory Rebel +2" lift front shock and spring assembly. If you want to run 37" tires on your Rebel this lift will allow you to do that BUT the lift height increase over stock will be closer to 4" inches and NOT the 6" inches advertised.

Fabtech K3087DL Contents:
1 x FTS23200 = Component Box 1
1 x FTS23201 = Component Box 2
1 x FTS23157 = Front Dirt Logic 2.5 Coilovers
2 x FTS811442 = Rear Dirt Logic 2.25 Shocks

Kit Features:
Crossmembers: 1/4" thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension.

Steering Knuckles: Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the factory ESC for proper functionality at all speeds.

Dirt Logic 2.5 Coilovers: Constructed of a stainless steel body and NitroSteel piston rod these 6” lift Coilovers are the finest quality on the market. Extensive ride work was performed to ensure a superior ride on and offroad. Outstanding damping for offroad.

Skid Plate: A heavy duty front differential skid plate is constructed of 1/4” thick steel to protect the diff from offroad obstacles.

Differential Mounts: Integrated differential mounts on the crossmembers properly reposition the front diff for the precise CV and driveshaft angle throughout the entire steering and suspension travel range.

Sway Bar Brackets: Heavy duty drop brackets retain the factory link ends at the correct angle for a positive road feel without creating binding at full droop.

Rear Coil Spring Spacers: Steel rear spring spacers utilize the factory coil springs retaining the stock load carrying capacity and ride comfort.

Rear Track Bar Bracket: The bolt on relocation bracket re-centers the rear axle for the new ride height while retaining the factory roll center of the vehicle.

Dirt Logic 2.25 Rear Shocks: Constructed of a stainless steel body with NitroSteel piston rod for maximum corrosion resistance and durability. Superior ride quality both on and offroad. Excellent damping for offroad use.

Tire & Wheel Information:
The OEM wheel and tires are NOT compatible with this Fabtech 6" Lift. You must use aftermarket 20" or larger diameter wheels. Will NOT fit vehicles equipped with factory OEM 22" wheels and the heavy duty "XL" bearing option.

Recommended Tire Size – 35/12.50R20 Wheel Size – 20×9 wheels w/ 5” BS w/ minor trimming
Recommended Tire Size – 37/12.50R20 Wheel Size – 20×9 wheels w/ 5” BS w/ minor trimming

For more information please click on the "Ask A Question" link located at the very top of this page.