Fox Racing 2001-2010 Silverado & Sierra 2500HD Shock # 980-24-622-A
This Fox Racing Shock has been purpose built and valved for use on the rear of lifted GM trucks. This shock will fit the rear of a 2001-2010 1500HD, 2500, 2500HD or 3500 Single Rear Wheel trucks equipped with a 4" to 6" rear suspension lift. Please note, this shock is NOT designed for use on 3500 Dual Rear Wheel trucks! Fox Racing Shox have been used on winning off-road racing vehicles since the 1970s. With hundreds of class victories and thousands of hours of off-road use, its no wonder Fox Racing Shox is considered one of the best builders of performance shock absorbers on the planet! Fox has put over 25 years of off-road racing and shock building experience into these shocks and it shows. The Fox 2.0 Series are completely rebuildable and allow for fine tuning which means these shocks are quite possibly the last set you'll ever need to purchase for your vehicle.
Brand | FOX Racing Shox |
---|---|
Manufacturer | Fox Racing Shox |
Part Number | 980-24-622-A |
MPN | 980-24-622-A |
Vehicle Year | 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001 |
Vehicle Make | Chevrolet, GMC |
Vehicle Model | Sierra 2500HD, Sierra 3500 DRW, Sierra 3500 SRW, Silverado 2500HD, Silverado 3500 DRW, Silverado 3500 SRW |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |
As the shock absorber is exposed to exessive heat it will fade and/or fail. If you are experiencing excessive shock failure or fading, it may be time to step up to the performance of a Fox 2.0 Remote Reservoir shock absorber. The addition of a remote reservoir to a shock allows for increased shock fluid capacity. Increased fluid capacity allows the shock to run at a more constant temperature as a higher oil volume requires more time to heat. These Fox 2.0 Remote Reservoir series shock utilize an external reservoir to allow for increased shock fluid capacity and improved resistance to shock fade (over heating during extended periods of use).
Features:
* Special Smooth-Bore seamless alloy steel body
* A high-flow, large bore, damping piston and utilizes the highest quality valve shims available
* Nitrogen gas pressurized to 200psi
* Teflon lined steel spherical bearings
* Hard-chrome steel shaft
* Billet aluminum end-caps and eyelets
* Fully rebuildable & revalvable
This Fox 980-24-622-A Rear shock has been designed and valved for use on a 4" to 6" lifted Silverado or Sierra 1500HD, 2500, 2500HD, or 3500 SRW. Please verify this is the correct shock for your application before ordering.
If you have any questions on this or any other Fox Racing Shox please click on the "ask a question" link located at the very top of this page.
Brand | FOX Racing Shox |
---|---|
Manufacturer | Fox Racing Shox |
Part Number | 980-24-622-A |
MPN | 980-24-622-A |
Vehicle Year | 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001 |
Vehicle Make | Chevrolet, GMC |
Vehicle Model | Sierra 2500HD, Sierra 3500 DRW, Sierra 3500 SRW, Silverado 2500HD, Silverado 3500 DRW, Silverado 3500 SRW |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |