Click here to ask a question

Tech Support Sales: (949) 629-3017 - Open M-F 9:00am to 5:00pm Pacific

Free shipping on most orders!

FOX Racing 2014-2016 Ford F150 4x4 Reservoir Coilover # 883-02-132

FOX direct replacement shocks deliver race-winning performance in a simple direct replacement bolt on shock. Each application has been rigorously tested by Fox Racing Shox engineers to maximize suspension travel and performance on and off the road. This FOX 2.5 Factory Series replacement coilover is designed for use on 2014, 2015 and 2016 model year Ford F150 4x4 trucks and can provide between 0" and 2" inches of lift over stock height. Keeping the lift height to 2" inches or under delivers the best ride and handling. With the addition of an aftermarket upper control arm this coilover can provide in excess of 2" inches of lift while still providing good on and off-road ride and handling. Please note that this coilover will NOT fit the SVT Raptor F150 or any 2wd models. Keep reading below for more details...

SKU: FOX883-02-132
Sign up for price alert
Only 2 left

Availability: In stock

Regular Price: $1,594.95

Sale Price $1,494.95

Fox Racing Shox

Safe, Secure, Trusted Seller



These FOX Racing Shox 2.5 Factory Series Reservoir Coilovers # 883-02-132 are designed for use on 2014, 2015 and 2016 model year Ford F150 4x4 trucks only. This coilover shock will not fit 2wd models. These FOX coilover shocks are sold as a matched pair. The price listed includes 1 pair of Fox Factory 2.5" Series 883-02-132 Reservoir Coilovers. We also offer FOX Rear Shock Absorbers for use with the 2014+ F150 4x4 trucks. Rear shocks can be purchased using the selection boxes located above this item description. Please note that rear shocks are NOT included and must be purchased separately.

Each FOX Racing Shox 2.5 Factory Series Coilover features a smooth-bore, clear coated, zinc plated, and honed seamless alloy body. The end caps and mounts are Black anodized 6061-T6 billet aluminum. The shock shaft is 7/8" heat treated alloy steel that is hard chrome plated. The piston design was developed by Fox through years of Racing experience and the valving is vehicle and application specific to maximize on and off-road performance. Fox Racing Shox hold up to daily driver use because of a unique redundant sealing pack system that features the main seal, a wiper seal, and a scraper seal. And because Fox knows their coilovers are used all over the world they use a specially formulated shock oil that is designed to provide consistent performance at variable temperatures, Alaska Winters to Arizona Summers, these shocks can handle both extreme cold and extreme heat.

FOX pre-adjusts this coilover to provide enough lift to achieve a level ride height on most F150's. This is a fully adjustable coilover that can be adjusted to provide more or less lift. Please note that as you increase the ride height through additional spring pre-load you will notice a reduction in ride quality. If you want to achieve more than 2" inches of lift the installation of an aftermarket upper control arm designed to provide an increase in suspension travel can help you gain up to 3" inches of lift and still maintain a good ride. If you are not going to install an aftermarket upper arm we recommend keeping the lift height to 2" inches or less. More is possible but the ride quality will suffer as you go taller!

For more information on this or any other FOX Racing Shox product please click on the "ask a question" link located at the very top of this page.

Additional Info

Additional Info

Free Shipping Free Ground Shipping!
Manufacturer Fox Racing Shox
Part Number 883-02-132
Compressed Length No
Extended Length No
Shock Travel No
Shock Boot Included No
Vehicle Make Ford
Vehicle Model F150
Vehicle Year 2016, 2015, 2014
Current Rebates No
Drive Type 4-Wheel Drive
Made In the USA Yes


Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)