ICON 2.0 Aluminum Series IFP Shock Service Kit # 202002

ICON Vehicle Dynamics 2.0 Aluminum VS Series IFS Shock Service Kit # 202002. This kit is only for use on 2.00" smooth body IFP shock absorbers. This Service Kit includes all necessary seals and nitrogen charge port to rebuild one ICON shock. If you are rebuilding more than one shock you will need one Service Kit for each shock.

Service Kit Contents:
• 2.0 Aluminum Series IFP Shock Seals
• Nitrogen Charge Port with Sealed Cover Screw

Additional Shock Rebuild Information:
ICON and Donahoe Racing shocks must be properly charged with Nitrogen to the recommended PSI before the shock can be put back into service on your vehicle. Charging an ICON shock equipped with the low profile charge port will require a special Nitrogen fill tool that you may not have. The ICON Nitrogen Fill Tool # 252004 is available for purchase separate from this service kit. Please note that "shop air" is not recommended for use in any ICON Shock Absorber. When rebuilding your shocks it is advised to use fresh shock fluid. Most ICON 2.5 shocks will require between 1/4 and 1/2 gallon of fluid. Shock fluid can be purchased via our website under ICON part number 254101G (1/2 Gallon) and 254100G (1 Gallon). Shock fluid is NOT included with this service kit.

For more information on this or any other ICON Vehicle Dynamics product please click on the "Ask A Question" link located at the very top of this page.