ICON 2017 - 2023 Ford SuperDuty Adjustable Track Bar # 64038
This Icon Vehicle Dynamics # 64038 adjustable pan-rod bar is designed for use on 2017 - 2023 Ford F-250 and F-350 Super Duty trucks built on the 4x4 chassis. This item will not fit any 2wd SuperDuty. This item is often necessary after a lift or leveling kit has been installed. The purpose is to allow the front axle to be adjusted from side to side and centered beneath the chassis. On some suspension kits this item is required to get the front axle properly re-centered beneath the chassis. Keep reading below for more information...
Brand | ICON Vehicle Dynamics |
---|---|
Manufacturer | ICON Vehicle Dynamics |
Part Number | 64038 |
MPN | 64038 |
GTIN | 00840103405544 |
Vehicle Year | 2023, 2022, 2021, 2020, 2019, 2018, 2017 |
Vehicle Make | Ford |
Vehicle Model | F250, F350 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |
ICON Ford SuperDuty Adjustable Track Bar # 64038. There are other adjustable pan-rod bars on the market that might cost less, but we haven't been able to find one that is designed or built as stout as this one. This Bar comes complete with ICON's bearing rod end and rod end spacers to help reduce the death wobble that some Ford F250 and F350 SuperDuty Trucks experience over rough road surfaces. Yes, on certain trucks this Adjustable Pan Rod bar has SOLVED the Death Wobble! This ICON Track Bar (also called a Pan Rod Bar) features the updated "Bearing" mount design. This ICON Track Bar is designed for use on 2017 - 2023 Ford Super Duty 4x4 trucks. Please note this item will ONLY fit 4x4 models! The Adjustable Track Bar will allow you to realign your front end track alignment within factory specifications after a suspension lift or leveling kit has been installed. It can be used on lifts ranging from 2.5" up to 9" inches of lift over stock height. This adjustable track bar can easily be installed using factory hardware and can be adjusted right on the truck without having to take it off. Please note, any Lift 6" inches or taller will also require the use of a Drop Down Bracket for the Track Bar to reduce bumpsteer. This product has been designed to work with all ICON Vehicle Dynamics suspension lift kits made for the F-250 and F-350 Super Duty 4x4 trucks.
Important Product Information:
This track bar is adjustable from 36.75” to 37.75” eye to eye. The factory installed Ford track bar measures 36.625” from eye to eye.
Installation Notes:
You will need 3/8", 13mm, 27mm and 30mm sockets, end wrenches and a BIG 3/4 drive torque wrench for installation. The ICON track bar is installed using the factory hardware so it is important you do not damage it during removal of the factory track bar. Please note that the recommended torque specification for the upper Track Bar Bolt is 406 ft/lbs. Yes, that's just over 400 hundred foot pounds. Most 1/2 drive torque wrenches will not be able to provide an accurate reading at this level. A 3/4" drive torque wrench may be required. This is one area where "it feels pretty tight" won't be good enough. Proper torque on this bolt is critical to a safe assembly!
For more information on this or any other ICON Vehicle Dynamics product please click on the Ask A Question link located at the very top of this page.
Brand | ICON Vehicle Dynamics |
---|---|
Manufacturer | ICON Vehicle Dynamics |
Part Number | 64038 |
MPN | 64038 |
GTIN | 00840103405544 |
Vehicle Year | 2023, 2022, 2021, 2020, 2019, 2018, 2017 |
Vehicle Make | Ford |
Vehicle Model | F250, F350 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |