This PRG Nissan Frontier 1.5" leveling lift kit includes two aircraft quality 6061-T6 billet aluminum spacers, Grade 8 hardware and a pair of replacement cotter pins. Please note that this PRG 1.50" Leveling Kit does NOT include Urethane Bumpstops like the 2" and 3" kits do. Again, bumpstops are NOT included as they are not necessary. Detailed printed installation instructions designed for the do-it-yourself installer are also included. Installation time for most customers is under 2 hours. Even better, installation does NOT require the use of a spring compressor like other kits do! As with any suspension modification, your vehicle will need to have the front end alignment checked and adjusted after installation of this suspension lift kit. Certain Frontier trucks may need an adjustable cam and bolt kit (available separately) to allow the camber to be set within Nissan recommended specification. This Nissan Frontier leveling kit can be removed at anytime and allows the vehicle owner to easily return his or her Nissan to stock specifications.
PerformanceLifts.com and PRG Products offer a number of way to also lift the rear of the Nissan Frontier. These rear lift options are designed to retain the full factory rated carrying and towing capacity of the Frontier and are very easy to install. If you would like to maintain some or all of the rake (rear higher than the front) these rear lift options will allow you to do so. PRG offers optional rear block and u-bolt kits that allow you to easily raise the back of a 2005 or newer Nissan Frontier. These block kits are available in 1.00" 1.50" and 2.00" inch lift heights. You can purchase a block & u-bolt kit by selecting them from the drop down selection box located directly beneath this item description near the product price. For customers that want a rear lift that is adjustable PRG offers their Variable Height Rear Shackle Lift. This PRG variable height replacement shackle can be easily adjusted to provide 1.00" / 1.50" / 2.00" of lift by simply relocating the spring pivot bolt position on the shackle. If you aren't sure how much rear lift your specific truck will need to sit level after the front is raised one and a half inches the PRG shackle is the wise purchase as you can easily adjust the rear height to give your truck the stance and appearance you want it to have. Certain Frontier models may experience PRG Lift Shackle to exhaust tail pipe interference when installing the PRG lift shackle. The solution is to either cut or re-route the exhaust tail pipe.
This item fits all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Nissan Frontier 2wd and 4wd trucks, including those equipped with the Nismo or PRO-4X package. This item also fits the Suzuki Equator trucks built on the Frontier chassis. The largest recommended tire size recommended for use with this leveling kit is a 285/75R16 or 285/70/17 tires on factory Nissan wheels. When using aftermarket wheels that have less back space than a factory wheel smaller diameter tires may be required to prevent tire rub. Please note, other tire sizes may fit. Generally speaking, tire diameter should not exceed 33 inches. For more information on this or any other PerformanceLifts.com item we ask that you please click on the "ask a question" link located at the very top of this page.
This item ships for free via standard Ground service to all addresses located in the contiguous 50 United States of America!
|Free Shipping||Free Ground Shipping!|
|Vehicle Year||2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005|
|Drive Type||2-Wheel Drive, 4-Wheel Drive|
|Made In the USA||Yes|