Click here to ask a question

Tech Support Sales: (949) 629-3017 - Open M-F 9:00am to 5:00pm Pacific

Free shipping on most orders!

PRG Nissan Frontier Upper Control Arm

This PRG Upper Control Arm kit is designed for use on the 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016 model year Nissan Frontier and new Suzuki Equator trucks. This arm kit fits both 2wd and 4wd models. PRG designed this Upper Control Arm kit to extract the most wheel travel from your Frontier or Equator using the appropriate front shocks. That means to really get the most from this product you'll need to run a set of Extended Travel Coilovers. Keep reading below for more details...
SKU: PRGNFUCA
Sign up for price alert
Only 1 left

Availability: In stock

$639.00
PRG Products

Safe, Secure, Trusted Seller

Details

Details

PRG Products Nissan Frontier / Xterra / Pathfinder Upper Control Arm Kit. The first thing to know is these control arms do not provide any additional lift by themselves. You will need the appropriate replacement Extended Travel Coil Over Shock to get maximum wheel travel and performance from this upper a-arm. Each control arm has a built-in urethane droop stop that helps reduce noise when the suspension is at full extension. The PRG UCA kit can be used in conjunction with any leveling kit to prevent any noise on full extension. PRG has designed the arm kit to allow the maximum droop possible with absolutely no harm to your CV joints, CV boots, or ball joints.

Each PRG Upper Control Arm is built using chromoly tubing that is powdercoated gloss black. PRG includes Grade 8 installation hardware. The inner pivots are 3/4" rod ends that will not squeak like urethane and use stainless steel spacers for years of use. PRG replaces the factory ball-joint design in favor of a 7/8" uniball. Additional alignment correction is possible with these adjustable heim joints. Installation is not too difficult as these arms come assembled, but because the way Nissan installed the steering shaft removing the factory upper a-arm requires that a factory bolt be cut and PRG provides a replacement bolt for you (you will not need to ever cut the bolt again to remove the arms, as the new bolt is inserted from the opposite side and can be removed easily). Alignment cams are NOT needed with the PRG Upper Arm Kit but an alignment is still recommended.

These PRG Upper Control Arms are not designed to provide additional lift by themselves. In other words, adding this arm by itself will not give you more lift. This arm is designed to allow you to get additional height from an aftermarket spacer or coilover and prevents the upper arm from hitting the coil bucket. To achieve the best performance a RadFlo or Sway-A-Way replacement coilover is highly recommended. These control arms can also be used with a CST or Fabtech subframe kit and a lift spacer (or adjustable coilover) to achieve additional height. This arm is also a very good upgrade if you frequently take your Frontier off-road. This PRG Products UCA fits all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016 model year 2wd and 4wd Nissan Frontier pickup trucks and Xterra SUV's. This item fits 2005-2012 Nissan Pathfinder SUV's as well. This UCA also fits the new 2009+ Suzuki Equator pickup trucks based on the Frontier chassis!

This item ships for FREE via standard ground service to any address in the United States of America - Alaska & Hawaii included!

Additional Info

Additional Info

Free Shipping Free Ground Shipping!
Manufacturer PRG Products
Part Number PRGNFUCA
UPC No
Vehicle Make Nissan
Vehicle Model Frontier
Vehicle Year 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005
Drive Type 2-Wheel Drive, 4-Wheel Drive
Made In the USA Yes
Installation Guide No
Current Rebates No

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register