RCD 1999-2003 Toyota Tundra 4-6" Lift Kit # 10-47400
This RCD 4" to 6" suspension lift system is designed to fit all 2wd and 4wd Toyota Tundra full-size trucks made between 1999 and July 31, 2003. If your Tundra has a build date of August 1, 2003 or later, this kit will NOT fit! Race Car Dynamics includes CNC machined replacement cast iron steering knuckles that increase lift and provide for precise steering geometry. The heavy duty two piece lower sub-frame assembly and polished stainless steel Twin -Link anti-compression struts insure structural strength and durability. A pair of Bilstein 5100 Series coil-over front shocks are included and offer superior handling and ride characteristics versus the stock factory offering.
Keep reading below for more information...
Brand | Race Car Dynamics |
---|---|
Manufacturer | RCD Suspension |
Part Number | 10-47400 |
MPN | 10-47400 |
Vehicle Year | 2003, 2002, 2001, 2000, 1999 |
Vehicle Make | Toyota |
Vehicle Model | Tundra |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |
Race Car Dynamics 1999 - 2003 Toyota Tundra 4" / 6" Suspension Lift # 10-47400. When set to provide 6" inches of lift this RCD lift kit will clear up to a 35" diameter tire with minor trimming. The most common tire size run with this kit is the 315/75R16 and may require minor trimming to prevent rubbing. RCD recommends using an 8" wide wheel with this kit. Please note, wheels must not have more than 4" of back space. This kit will fit all 2000, 2001, 2002, and 2003 model year trucks built up to July 31, 2003. The early 2003 trucks utilize a smaller ball-joint that uses 10mm hardware. The later 2003 trucks use 12mm bolts and the ball-joint is larger. We have seen some trucks with a build date after 8/1/2003 require the smaller design so if your truck is near the cutoff we recommend measuring your existing lower ball-joint hardware before purchasing this kit.
RCD doesn't skimp when it comes to kit finish either... this kit has RCDs famous Gator Black polyurethane powder coat finish that provides lasting good looks, even in harsh climates. RCD knows that its the little things that can make or break a kit. Thats why they include Grade 8 hardware for strength and reliability. Steel braided front brake lines are the correct length for use with the suspension lift and offer increased braking performance over the rubber hoses they replace. The impact struts that RCD includes serve two purposes, first, they look great! Second, they help beef up the front end and are designed to strengthen the lower subframe. The RCD 10-47400 4-6" suspension lift includes everything necessary to install the kit, including Bilstein 5100 series shocks for the front and rear. The rear lift method is a replacement block and U-bolt kit.
If you have questions about this RCD product please click on the Ask A Question link located at the very top of this page.
Brand | Race Car Dynamics |
---|---|
Manufacturer | RCD Suspension |
Part Number | 10-47400 |
MPN | 10-47400 |
Vehicle Year | 2003, 2002, 2001, 2000, 1999 |
Vehicle Make | Toyota |
Vehicle Model | Tundra |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |