Superlift 2014+ Silverado & Sierra 1500 2WD 8" Lift - Steel Suspension

The Superlift # K946 is designed for use on 1500 series 2wd Silverado and Sierra trucks equipped with the Steel front suspension. Please note that this lift will NOT fit 4x4 trucks. This Superlift lift kit will provide approximately 8" inches of front suspension lift and 6" inches of rear lift to achieve a level stance. With this much lift a 35" tire will clear without trimming. This suspension system includes everything you need to lift the truck and get it back on the road... including longer front and rear Superide shocks! Everything you need and at one incredibly low price!

This suspension system was designed using factory CAD data specifically for the 2014 and 2015 Chevolet Silverado and GMC Sierra 1500 Series 2WD Pickups. This lift is specifically designed for use on trucks with the STEEL front suspension. You can tell if you have the STEEL suspension because a magnet will stick to the upper or lower control arms. The lift is compatible with Stabilitrac and anti-skid control features that are standard on most modern GM trucks. The High Clearance cross members and all other load bearing bracketry is laser cut from .25" thick plate steel. Rear cross member kicker braces further increase system rigidity and strength. New front premium gas struts and Superide rear shocks provide as good or better ride on and off-road versus the factory shocks. Rear lift blocks and add-a-leafs provide enough lift to achieve a level stance and enough room to clear up to 35” diameter tires without fender trimming. And you can rest easy knowing your are buying a well built kit... so well built that Superlift backs this lift with their Limited Lifetime Warranty and 100% Satisfaction Guarantee!

Tire & Wheel Information
Because Superlift includes new steering knuckles this lift does have very specific tire and wheel requirements. Factory 17" or 18" wheels will NOT work without wheel spacers. Wheel spacers are NOT included! Factory 20" wheels will work, even with larger than stock size tires. Aftermarket wheel back space requirements will vary and the recommended back space will be dependent on the wheel diameter. In general aftermarket wheel back space must be between a minimum of 4.50" and a maximum of 5.50".

Important Notes:
Minor cutting and / or welding is required. Fits vehicles with Steel front suspension only. Fits vehicles with standard shocks only - Not compatible with vehicles equipped with factory Electronic Controlled Shocks.

For more information on this or any other Superlift suspension product please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via standard ground service to any address located in the contiguous 48 United States of America!