SPC 2005+ Toyota Tacoma Upper Control Arm # 25470

This SPC Adjustable Upper Control Arm # 25470 is designed for use on 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and 2022 model year Toyota Tacoma that has run out of factory adjustment after a lift or leveling kit has been installed. Please note, this Upper Arm Kit will only fit 6-lug models. Fits all 2wd and 4x4 Tacoma trucks with 6-lug wheels. The SPC 25470 is the best control arm kit we offer at great price. If you need an additional +/- 2.00 degrees of camber or caster correction these arms can provide it. But don't let the low price fool you... these SPC Adjustable Upper Control Arms also provide an increase in strength, additional suspension travel, and a wide range of alignment adjustment options. These SPC heavy duty replacement upper control arms feature DOM tubing construction and uses a patented adjustable ball joint and new SpecRide bushings. Built with an OE style ball joint these upper control arms correct the alignment angles while maintaining factory ride quality and OE like reliability.

Specialty Products Company designed their Toyota Tacoma upper control arm kit to provide truck owners with an awesome replacement upper control arm at a very reasonable price. The SPC design provides for a significant Camber and Caster change to help correct ride quality and tire wear issues that are common after a lift or leveling kit has been installed. This design provides an increase in articulation over the factory OE ball joint while still providing more clearance for the spring and tire than the OE arm does. Instead of using metal bearings SPC uses their new xAxis bushings and an OE style ball-joint assembly that should never require service. And the best part of the SPC design is that it offers more strength in critical areas than the OE upper control arm does. This extra strength is necessary and beneficial to survive extreme off-road use when a Tacoma is taken off the pavement.

NEW xAxis Bushings
Free Moving Pivot Ball eliminates failures caused by high travel suspensions
Noise and vibration control
Ozone, oil and alkaline resistant material
Front Adjustment range: Camber +/-2.00 degrees, Caster 0.0 degree to +4.00 degrees
Installation time: Approximately 1 hour per side

The SPC Upper Control Arm # 25470 features a unique hybrid tubular and forged steel design that is tough enough to race.. on or off-road. If your stock upper control arms had sufficient travel in the ball joint these SPC arms will not be the limiting factor to suspension travel! The OEM style sealed high-angle ball joint allows for sufficient travel without the squeaks and rattles commonly caused by un-sealed Uniball style control arms. The hybrid tubular steel design is tough enough to survive even the harshest usage. These SPC arms can be used in conjunction with the factory alignment cams to maximize clearance in the wheel well.

For more information on this or any other Specialty Products Company product please click on the "ask a question" link located at the very top of this page.

This item ships for free via standard ground service to any address in the 50 United States of America!