Bilstein Toyota Tundra 0-2" Lift Coilovers # BTS7514

The Bilstein BTS-7514 coilover will fit all 1999-2006 2wd and 4x4 Toyota Tundra trucks. This product is an excellent option for someone looking to increase the lift height of their Tundra up to 2" inches. Please note that on V8 Equipped Crew Cab models Please note that on Crew Cab models the actual lift height may be less than 2" inches due to the increased weight those trucks have over the front suspension. Bilstein uses OEM mounting bushings for long life and includes a Bilstein/Hyperco 2.5" progressive rate spring, and all spring mounting hardware. As with all 5100 series shocks it comes Zinc plated and has a lifetime aftermarket warranty. For customers looking to improve the rear ride of the Tundra, PerformanceLifts.com strongly suggests adding the Bilstein companion rear 5100 shocks with matched valving. The rear shocks are part number BE5-AO14-H5 and really make a noticeable ride quality improvement.

Please note that 4wd Tundra owners should limit lift to 2 inches over stock height. Lifting the front more than 2" inches on a 4wd Tundra can cause CV boot wear and eventually CV damage. If you are a 4wd Tundra owner and want to get the full lift height from this Bilstein coilover we now offer the Total Chaos 1" Differential Drop kit. By lowering the front differential 1" you can increase front lift height beyond 2" inches. This item is available using the drop down selection box located beneath this item description. 2wd Tundra owners can get approximately 3 inches of lift with these coilover shocks. Installation is relatively quick and easy. Please note however that the alignment should be checked and adjusted as necessary after the installation of these coilover shocks. As you increase the height of the front end the steering has a tendency to toe in.

This item ships for free via ground service to all addresses located in the lower 48 United States of America!