CST 2007-2015 Toyota Tundra 7" Lift # CSK-T6-1
This CST Performance Suspension Lift System can provide approximately 7" of true front suspension lift depending on how it is adjusted. CST includes a rear lift block that will raise the rear approximately even with the front when the front has been adjusted to provide 7" inches of lift over stock height. CST offers replacement rear shock absorbers for use with this CSK-T6-1 lift system but does not include them with this particular kit. The track width increase is minimal with the CST suspension lift design but factory wheels will NOT work unless wheel spacers are installed. This CST lift is proudly made in the USA by skilled men and women!
Keep reading below for more product information...
| Manufacturer | CST Performance Suspension |
|---|---|
| Part Number | CSK-T6-1 |
| Vehicle Year | 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007 |
| Vehicle Make | Toyota |
| Vehicle Model | Tundra |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
This CST Suspension Lift System # CSK-T6-1 is designed to fit all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 and 2015 Toyota Tundra 2wd and 4x4 trucks. Yes, this high clearance crossmember design will also fit 4x4 models! The CSK-T6-1 Suspension Lift is designed to lift the front of the Tundra by 7" inches and will allow the use larger than stock tires. This lift will clear most 35" tires and with trimming and the Body Mount Chop mod can clear a 37" tire on the correct size wheel. Please note that 20" or larger diameter wheels will be required when installing this lift system.
Features & Benefits:
This CST 7" lift includes a set of fabricated steering knuckles built using 1/4" plate steel. Lesser quality kits include cast iron knuckles that are both heavier and weaker than the CST design. If you are looking for the strongest suspension lift available for your Tundra this kit is for you! The majority of the CST components are fabricated from sheet steel and CNC machined parts, welded by hand, and finish machined to ensure it's going to fit right the first time. This CST Toyota Tundra 7" lift can also be used in addition to an aftermarket coilover to gain in excess of 8" inches of front suspension lift. A wide range of suspension lift height options and combinations are available. If you would like to put together a custom lift package for your Tundra please let us know.
Tire & Wheel Fitment:
This CST 7" Lift will require the use of an aftermarket wheel that is at minimum 20" inches in diameter. CST recommends that wheels have no more than 5.00" inches of back space. The stock Toyota Tundra wheel has too much back space and will NOT work with this CST lift. You, the owner, must ensure your tire and wheel combination have sufficient clearance before operating the vehicle!
2016 Model Year Fitment:
Due to changes made to the 2016 Toyota Tundra this lift does NOT fit properly. Toyota has made several small changes to a number of key areas that prevent the proper installation of this lift on 2016 trucks. CST now offers a unique part number for 2016 and newer trucks available on our website here: http://performancelifts.com/cst-2016-toyota-tundra-7-lift-system-csk-t3-3-3.html
If you have any questions please let us know. Simply click on the "ASK A QUESTION" link located at the top of this page.
This item ships for FREE via ground service to any address in the 48 United States of America!
| Manufacturer | CST Performance Suspension |
|---|---|
| Part Number | CSK-T6-1 |
| Vehicle Year | 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007 |
| Vehicle Make | Toyota |
| Vehicle Model | Tundra |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
