CST 2016 - 2021 Toyota Tundra 7" Stage 1 Lift # CSK-T10-1

This CST Suspension Lift System # CSK-T10-1 is designed to fit all 2016, 2017, 2018, 2019, 2020 and 2021 Toyota Tundra 2wd and 4x4 trucks. Yes, this high clearance crossmember design will also fit 4x4 models! The CSK-T10-1 Suspension Lift is designed to lift the front of the Tundra by 7" inches and will allow the use larger than stock tires. This lift will clear most 35" tires and with trimming can clear a 37" tire on the correct size wheel. Please note that 20" or larger diameter wheels will be required when installing this lift system.

Features & Benefits:
This CST 7" lift includes a set of fabricated steering knuckles built using 1/4" plate steel. Lesser quality kits include cast iron knuckles that are both heavier and weaker than the CST design. If you are looking for the strongest suspension lift available for your Tundra this kit is for you! The majority of the CST components are fabricated from sheet steel and CNC machined parts, welded by hand, and finish machined to ensure it's going to fit right the first time. This CST Toyota Tundra 7" lift can also be used in addition to an aftermarket coilover to gain in excess of 8" inches of front suspension lift. A wide range of suspension lift height options and combinations are available. If you would like to put together a custom lift package for your Tundra please let us know.

Tire & Wheel Fitment:
This CST 7" Lift will require the use of an aftermarket wheel that is at minimum 20" inches in diameter. CST recommends that wheels have no more than 5.00" inches of back space. The stock Toyota Tundra wheel has too much back space and will NOT work with this CST lift. You, the owner, must ensure your tire and wheel combination have sufficient clearance before operating the vehicle!

2016 - 2021 Model Year Fitment:
The CST # CSK-T10-1 will fit the revised 2016 through 2021 Toyota Tundra! It will NOT fit the new 2022+ models!

CST # CSK-T10-1 Lift System Contents:
Box 1 - CSS-T3-3-B1 (Qty 1)
Box 2 - CSS-T3-3-B2 (Qty 1)
Box 3 - CSS-T3-3-B3 (Qty 1)

Rear Lift Height:
CSTincludes a 4" tall offset pin block with this kit. That means with 7" of front lift and 4" of rear lift the truck should have a fairly level stance. Most of the Tundra trucks sit between 2.5" and 3" out of level from the factory. By raising the front more than the rear CST reduces the factory "raked" stance. If you would like to lift the rear more than 4" inches we do offer optional products designed to provide additional lift. For most customers we recommend installing the kit as supplied by CST and then adjusting the rear ride height if you find it necessary. Most customers do NOT require additional rear components after they see their truck lifted in person.

If you have any questions please let us know. Simply click on the "ASK A QUESTION" link located at the top of this page.

This item ships for FREE via ground service to any address in the 48 United States of America!