CST 2020+ GM 3500 HD 4" Lift Stage 10 # CSK-G23-310

CST Performance Suspension Stage 10 4" Suspension Lift System # CSK-G23-310 is designed for use on the new 2020, 2021, 2022, 2023 and 2024 model year Chevrolet Silverado and GMC Sierra 3500 HD series trucks. With 4" inches of front suspension lift the new GM trucks can clear most 35" tires and running up to a 37" tire is possible with minor trimming. And yes, this lift fits both 2wd and 4x4 models. CST designed their all new lift to provide 4" inches of suspension lift with the torsion bars set at the factory setting. Doing this provides a very smooth and compliant ride that soaks up the bumps like you can't believe. The CST drop subframes provide a true 4" inches of lift and from there you can either adjust the torsion bar settings up or down to achieve your desired ride height. This kit includes a 2" rear lift block and extended length U-bolts. Additional rear lift may be necessary to achieve the desired stance when the front suspension is set above the standard 4" inches of lift height.

The Stage 10 system includes new CST Fabricated Upper Control Arms equipped with high angle ball joints that feature OEM Style bushings. The new CST ball joint gives you all the strength and function of a uni-ball, but with the longevity of a sealed ball joint. The ball joint is designed to hold up in extreme weather conditions and to seal out contaminants and make the arm look more Sano a billet top cover plate is included. The new OEM style bushing is designed to give you a quiet, no maintenance bushing. CST is so confident in their design that they are offering a Limited Lifetime Warranty on the complete arm including the bushings and the ball joints!

Tire & Wheel Information:

At the 4" lift height setting the CST kit can clear up to a 35" diameter tire on most 8" to 10" wide wheels. Use of 37" tires is possible but some light trimming will be required on the lower plastic valance (air dam). The use of low offset or wheels wider than 10" inches may require additional trimming to prevent tire rub when turning. For this reason CST recommends that wheels with a width of 8" to 9" inches be used. Factory GM 18" wheels are NOT compatible with this lift. Factory GM 20" wheels are compatible with this lift. When running larger than stock tires on an aftermarket 18" wheel the back space must not exceed 5.25" inches. When running a 20" or larger diameter wheel the back space must not exceed 5.75" inches. Use of wheels that are 10" inches or wider is against CST's recommendation due to the increased likelyhood that the front tires will rub when turning. If you want to run a WIDE wheel or a wheel with very low offset you can but the use of a smaller diameter tire may be required to prevent rubbing when turning.

Stage 10 Shock Absorber Information:

The CST Stage 10 system includes the very best shock absorbers CST offers for the Chevrolet Silverado and GMC Sierra 3500 HD trucks. A set of CST Pro Series 2.5 Reservoir with Adjusters replace the factory front and rear shocks on your truck. The Stage 10 system also includes the CST 2.5 Remote Reservoir Shock Mounting Kit # CSS-C33-9. The included Shock Mounting Kit allows you to replace the factory front shock and replace it with the included CST 2.5 Pro Series Remote Reservoirs w/Adjusters. The factory rear shock is also replaced with the CST Pro Series 2.5 PiggyBack Reservoir w/Adjusters. The rear shocks install using factory hardware.

CST # CSK-G23-310 Kit Contents:

CSS-C3-23-B1 - Front / Rear Sub Frames, Diff Drops, & Lift Blocks
CSS-C3-23-B2 - Left / Right Spindles
CSS-C3-23-B4 - Skid plate, Torsion Brackets, Torsion Sleeves, Hardware
CSS-C33-9 - 2.5 Series Front Shock Mounting Kit
CSA-7523 - PRO SERIES 2.5 Remote Reservoir Front Shock (pair)
CSA-7524 - PRO SERIES 2.5 Piggyback Rear Shock (pair)
CSS-C2-20 - Fabricated Upper Control Arms

Additional Information:

This CST Suspension Lift System is Stabilitrak and Sway Control compatible. CST does not take shortcuts and does not bring any product to market that cannot meet their very strict requirements for safety and driveability. The CST steering knuckles and welded subframe have been designed to retain the factory track width within 1/4" per side. Every CST component used in this suspension lift has been built to exceed the strength of the factory GM components they replace. And to protect the factory components, CST includes a front differential skid plate. All of the major components are powder coated in a high quality Gloss Black finish.

For more information on this or any other CST Performance Suspension lift system please click on the Ask A Question link located at the very top of this page.