Eibach 2019 - 2023 Ram 1500 2wd Pro-Truck Stage 2 Kit # E86-27-011-01-22

This Eibach Pro-Truck Stage 2 system # E86-27-011-01-22 is designed for use on 2019, 2020, 2021, 2022 and 2023 model year Ram 1500 2wd Crew Cab trucks with the 5.7L V8 gasoline engine. This suspension system is NOT designed for installation on any Ram Rebel trucks. This Eibach kit features 2.0 Series PRO-TRUCK Front Coilovers, PRO-TRUCK Sport series rear shocks and Pro-Lift rear coil springs. The front coilover is fully adjustable and can provide between 0" and 3.6" inches of lift over stock height on 2wd (rear wheel drive) models. Please note that you will most likely need to adjust the spring preload to achieve your desired lift height. Due to weight differences across the Ram 1500 model lineup we are unable to tell you exactly how much lift these coilovers will provide out of the box. But don't worry... they are easily adjusted using the provided spanner wrench! The included rear coil springs will provide approximately 1" of lift and the rear shocks are matched to accommodate this additional lift height.

Eibach # E86-27-011-01-22 Features:

Utilizes ERO Championship proven Off-Road racing springs
Front coilovers allow adjustment of up to +3.6" (varies by model)
Pre-assembled for direct bolt-on installation, out of the box lift height is set level w/ factory rear
Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
Rear performance shocks can accommodate +1.5" of lift
Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
Developed specifically to provide a balanced ride quality on and off-road
Made by Eibach in the USA
Zinc-coated shock tubes and anodized brackets to protect against corrosion
5/8” hardened, nitrocarburized rods for un-matched materials quality
Billet aluminum spring seats for strength
Sturdy 46mm tubing
Maxima (R) shock oil - because we only select the best

Eibach E86-27-011-01-22 includes a pair of Eibach E86-27-011-01-20 front coilovers that arrive fully assembled, a pair of rear shocks # E60-27-011-03-01 and a pair of # E30-27-011-01-02 rear coil springs. To make adjustment easier Eibach also includes 1 x 6mm adjustment spanner wrench and all required mounting hardware! Please note - When installing the rear shocks you will reuse your factory hardware (nuts and bolts).

For more information on this or any other Eibach product please click on the Ask A Question link located at the very top of this page.