Fabtech 1988-1998 Silverado & Sierra C1500 4" Lift # FTS1588-7
February 2021 - DISCONTINUED BY FABTECH - OUT OF PRODUCT / NO LONGER AVAILABLE FOR PURCHASE
GM's venerable C1500 full-size 2wd truck is a stylish and rugged performer which means there are lots of options available to trick-out these haulers. For C1500 and C2500 light duty 2WD trucks, Fabtech offers the 4" Lift Spindle which provides the simplest installation with the least amount of modifications. This 4" spindle kit is a terrific choice for all-around performance and for those looking to gain suspension ride height and additional ground clearance without sacrificing ride quality. By retaining the stock coil springs the ride will remain very similar to stock.
Keep reading below for more details...
| Manufacturer | Fabtech Motorsports |
|---|---|
| Part Number | FTS1588-7 |
| Vehicle Year | 1998, 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1988 |
| Vehicle Make | Chevrolet, GMC |
| Vehicle Model | Sierra 1500, Silverado 1500 |
| Drive Type | 2-Wheel Drive |
| Made In USA | Yes |
These Fabtech FTS1588-7 Lift Spindles are designed to fit all 1988-1998 C1500 and 1988-1999 C2500 Extended Cab light duty trucks and 1992-1998 Standard Cab trucks equipped with 5 and 6 lug wheel. Fabtech offers the FTS1588-7BC lift spindle (a different spindle) specifically for use on 1988, 1989, 1990 and 1991 Standard Cab Models only. Please note that this FTS1588-7 part number will also fit most 1992-1999 Chevrolet and GMC 2wd SUVs, including the 2wd Blazer, 2wd Tahoe, 2wd Suburban, and 2wd Yukon.
The FTS1588-7 provides a full 4" inches of Front Suspension Lift and increases ground clearance by four inches over stock as well! To level the vehicle PerformanceLifts.com suggests a 2" or 3" Lift Rear Block and U-Bolt kit be installed. For those looking to give their Silverado or Sierra the "prerunner" or "Baja" look a shorter 1" block is also available. Please note that the Shocks, Block, and U-Bolt shown in the picture are purchased separate from the Fabtech FTS1588-7 Spindles! All of these items are available separately using the selection boxes located above this item description.
Wider than stock tires cannot be installed on OEM wheels as they will rub the top of the spindle. Aftermarket wheels with a maximum back space of 3-3/4" are recommended. Maximum tire size suggested for use with this 4" lift spindle is a 32x11.5R15 on a 15x8" wheel.
For more information please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 48 United States of America!
| Manufacturer | Fabtech Motorsports |
|---|---|
| Part Number | FTS1588-7 |
| Vehicle Year | 1998, 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1988 |
| Vehicle Make | Chevrolet, GMC |
| Vehicle Model | Sierra 1500, Silverado 1500 |
| Drive Type | 2-Wheel Drive |
| Made In USA | Yes |
