Fabtech 2001-2004 Ford SuperDuty 4WD 3.5" Lift # FTS424-1BK

This kit does NOT include shock absorbers or any rear lift. These items are purchased separately. PerformanceLifts.com strongly recommends the Bilstein 5100 series shock absorbers for use with this kit. The Fabtech shocks are not as smooth riding as the Bilstein 5100 series and do not have the design or construction quality that Bilstein does. If you want the best shock for your money you cannot beat the Bilstein 5100 series!

If you wish to also raise the rear of your Super Duty or Excursion we ask that you please follow these simple steps. Decide how you want your vehicle to look when its lifted. Do you want the vehicle level? Slightly higher in the front? Higher in the rear? The easiest way to calculate how much rear lift you require is to take some measurements of the vehicle as it sits right now. If the front of your Super Duty is currently 2" inches lower than the rear and you want to build a LEVEL truck you will need an additional 1.5" inches of Rear Suspension Lift. If you want the truck to have the same stance, just lifted, you'll want to raise the rear approximately 3" inches over stock. Some Powerstroke vehicles are almost 3 inches lower in the front and require very little rear lift, in this case a 1.0" rear lift may be sufficient. Most Ford Excursion SUV's sit about 1.0 to 1.5 inches lower in the front and generally require more Rear Lift to achieve a level stance. Most Excursion owners are happy with a 2.0" or 3.0" rear block. We suggest you measure your vehicle to ensure you end up with the look you want. We can also help you select the correct rear shock absorbers and U-bolt kit based on the vehicle and block height you select.

For those customers looking to get the front axle precisely located under the vehicle you will want the adjustable track bar. Without the adjustable track bar the front axle will be shifted slightly to one side of the vehicle. The Fabtech Adjustable Track Bar is purchased separately and is highly recommended. All of the items necessary to put together a complete Fabtech 3.5" Suspension Lift are available on our website.

For additional information please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via ground service to all addresses located in the lower 48 United States of America!