Fabtech GM Replacement Spindle Kit # FTS21059

Fabtech Motorsports Spindle Retrofit Kit # FTS21059. This item includes a passenger and driver side spindle as well as new CV spacers and CV spacer installation hardware. This Fabtech FTS21059 part number was created specifically for use on 2001 - 2010 Chevrolet Silverado 2500HD / 3500 and GMC Sierra 2500HD / 3500 trucks as well as 2003 - 2008 Hummer H2 vehicles equipped with the OLD Fabtech 6" lift system. Fabtech made a running change to their spindle design. The discontinued spindles will have FTS20056D (driver side) or FTS20056P (passenger side) cast onto the part for identification. If you've damaged an old spindle on your truck or Hummer H2 this kit is your only repair option as you must replace BOTH spindles at the same time. Why? Because Fabtech reduced the spindle offset and changed the CV spacer thickness requirement by 1.00" inch.

Important Fitment Information - PLEASE READ!

Fabtech changed their spindle design quite a few years ago. This part number includes the "newer" design parts and may be a different part number than what is currently installed on your truck. THIS RETROFIT KIT IS DESIGNED TO REPLACE BOTH SPINDLES! The NEW spindle design requires a thinner CV spacer than the OLD spindles. The CV spacer thickness found on the old kit design was 1.50" inches. The new spindles require a CV spacer thickness of 1/2" inch. This part number includes the correct CV spacers and CV spacer installation hardware for use with the included spindles.

Fabtech FTS21059 Contents:
Qty 1 x FT20246D = Driver Side Spindle
Qty 1 x FT20246P = Passenger Side Spindle
Qty 2 x FT20247 = CV Spacer
Qty 1 x FT20425 = CV Spacer Installation Hardware

PLEASE do yourself a favor and contact us before purchasing this part. We can pretty quickly determine if it is correct for your vehicle or not.