Fabtech 2009+ Ford F150 4X4 6" Basic System # K2114
Fabtech Motorsport part number K2114. This Fabtech 6" Suspension Lift System is designed for use on 2009+ Ford F150 SuperCab and CrewCab trucks built on the 4wd chassis equipped with the 5.4L V8 engine. Constructed of 1/4" thick steel, Fabtech's signature arched lower control arm crossmembers and integrated differential skid plate provide strength and rigidity to the front frame and suspension. Crossmembers include adjustable eccentric cams for easy front end alignment and ability to hold alignment under offroad conditions. Fabtech's proprietary steering knuckles are built in the USA using the finest American made ductile iron and will allow the use of 18" or 20" diameter wheels. Fabtech also includes Sway Bar Brackets, Impact Struts, a 5" Rear Block with a built in bumpstop pad, and an Extended Length U-Bolt Kit. Fabtech offers two 6" systems, this is the Basic system and it includes a large Steel Spacer that allows you to retain the factory front coilover shock. The Performance 6" system is also available on our website and includes Dirt Logic 2.50 front coilover shocks and Dirt Logic Rear Shock absorbers for outstanding on and off-road ride.
| Manufacturer | Fabtech Motorsports |
|---|---|
| Part Number | K2114 |
| Vehicle Year | 2012, 2011, 2010, 2009 |
| Vehicle Make | Ford |
| Vehicle Model | F150 |
| Drive Type | 4-Wheel Drive |
| Made In USA | Yes |
FTS K2114 Kit Contents:
1 x FTS22130 - Component Box 1 of 2
1 x FTS22131 - Component Box 2 of 2
2 x FTS7266 - Performance Rear Shock Absorbers
This Fabtech K2114 suspension lift is not designed to allow the use of factory Ford wheels. Fabtech recommends an 18x9 or 20x9 wheel that has no more than 5.00" inches of back space. The recommended tire size is up to 35" inches in diameter and up to 13.50" inches wide. Minor trimming may be required when running the maximum recommended tire size.
Installation Notes:
Professional installation is recommended. Fabtech estimates this kit will require approximately 5 hours of labor to install. This installation time assumes the installer is a professional mechanic with access to all necessary tools. No drilling is required. No welding is required. There are no driveshaft modifications required.
If you have questions on this or any other Fabtech product, please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 48 contiguous United States of America! Alaska, Hawaii, and International customers must contact PerformanceLifts.com to receive a shipping quote before placing an order.
| Manufacturer | Fabtech Motorsports |
|---|---|
| Part Number | K2114 |
| Vehicle Year | 2012, 2011, 2010, 2009 |
| Vehicle Make | Ford |
| Vehicle Model | F150 |
| Drive Type | 4-Wheel Drive |
| Made In USA | Yes |
