Fabtech 2020+ GM 2500HD / 3500 6" Lift - Dirt Logic Shocks # K1160DL

Fabtech 6" RTS Lift Kit # K1160DL fits 2020, 2021 and 2022 Chevrolet Silverado 2500HD & GMC Sierra 2500HD trucks. It will fit both 2wd and 4x4 models. The heart of this lift kit is Fabtech’s cutting edge RTS design. Fabtech RTS is a bracket system that keeps the torsion bars in the factory location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading. It provides a very clean appearance to the vehicle.

Another important aspect of this GM 2500HD lift kit is the lower control arm crossmembers. They are arched at the bottom to provide additional ground clearance over "flat" designs and have an integrated skid plate to protect the front differential against offroad obstacles. The Fabtech crossmembers and bracketry are built with 1/4" thick steel that provides strength and rigidity to the vehicle’s suspension. The superior build quality and design of the components allows for a fast installation time with only four holes to drill and no cutting of the front diff housing. This heavy duty GMC Sierra and Chevy Silverado 2500HD lift kit is built with the highest quality components and is designed to provide years of trouble free service while offering a great ride.

Dirt Logic 2.25 Shocks
The stainless steel body with NitroSteel piston rod provides maximum corrosion resistance and durability. High quality componentry delivers a superior ride quality both on and offroad. Excellent damping for offroad use.

CROSSMEMBERS
1/4" thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional strength to the front suspension. Retains factory alignment cams for easy adjustment.

STEERING KNUCKLES
Fabtech’s extended length ductile iron Steering Knuckles provide zero bump steer throughout the suspension travel. This provides an enhanced driver experience compared to stock. Near stock track width keeps the tires under the fenders for a clean appearance.

TIE RODS
Oversized tie rods are provided to replace the stock units that are designed to handle oversized tires.

SKID PLATE
A heavy duty front differential Skid Plate is constructed of 1/4" thick steel to protect the diff from offroad obstacles.

DIFFERENTIAL MOUNTS
Heavy duty Differential Mounts properly reposition the front diff for the precise CV and driveshaft angle to reduce driveline vibration at high speed.

SWAY BAR MOUNTS
Heavy duty mounts reposition the front sway bar for on road functionality and no bind for offroad use.

Front & REAR BUMP STOP SPACERS
Steel brackets relocate the 4 front and 2 rear compression stops to align with the factory closed cell bump stops to control the travel and eliminate over cycling of the suspension.

REAR LIFT BLOCKS
3" tall rear lift blocks replace the factory blocks for additional lift without changing the ride quality or load carrying capacity. This block height helps level the truck front to rear.

REAR U-BOLTS
U-Bolts designed to attach the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.

Fabtech Kit Contents:
1 x FTS21277 = Component Box 1
1 x FTS21278 = Component Box 2
1 x FTS21279 = Component Box 3
1 x FTS801552D = Front Dirt Logic 2.25 Shock (Driver)
1 x FTS801552P = Front Dirt Logic 2.25 Shock (Passenger)
2 x FTS811562 = Rear Dirt Logic 2.25 Shock

Important Fitment Information - Please Read!
14. Can not use OEM wheel and tire. 
20. Does not fit standard cab models.
167. Diesel models only.