Fabtech 2021+ Ford F150 4WD 4" Performance System # K2386

This Fabtech 4" Suspension Lift System # K2386 will fit the updated 2021 and 2022 model year F150 4x4. It is designed for use on Gasoline engine equipped models only. Will not fit Hybrid models. Will not fit Raptor. This kit includes a set of Stealth Series monotube rear shocks that provide outstanding suspension control for both on and off-road use. The recommended tire size is up to 35" inches in diameter and up to 12.50" inches wide. Trimming may be required when running the maximum recommended tire size. This lift system will not allow the use of factory Ford wheels. Fabtech recommends an aftermarket 20x9 wheel that has no more than 5.00" inches of back space.

The Fabtech 4" F150 lift kit utilizes their proven heavy duty construction and design features found in their 6" systems but with less lift and at a lower price. This lift kit is a great choice for Ford owners that want to run up to a 35" tire for a more aggressive look while preserving the excellent highway manners of the F150. Fabtech signature high arched lower control arm crossmembers are constructed of 1/4" thick steel for maximum strength. There is a 1/4" thick steel skid plate that spans between the lower crossmembers to protect the front differential housing from impacts of offroad obstacles. The heavy duty ductile iron steering knuckles retain the stock track width keeping tires under the fender for a clean appearance. The front suspension receives Fabtech heavy duty gas charged twin tube shock that aids in damping capacity both on and offroad. The extended length of the shocks reposition the stock front coils springs to accomplish the 4" of lift height to clear 35" tall tires. The rear suspension utilizes lift blocks and longer u-bolts to help level the vehicle front to rear. Damping comes from the Performance Series shocks. This Ford F150 lift kit is just the right amount of lift to have a muscular stance with the ability to hit the trails on the weekend and be a comfortable daily driver. The best of both worlds.

Installation Notes:
14. Can not use OEM wheel and tire.
123. Will not fit Raptor models.
182. Fits gas models only.
227. Does not fit models equipped with CCD (continuously controlled damping) system.
230. Does not fit hybrid models.

Professional installation is recommended. Fabtech estimates this kit will require approximately 5 hours of labor to install. This installation time assumes the installer is a professional mechanic with access to all necessary tools. No drilling is required. No welding is required. There are no driveshaft modifications required.

If you have questions on this or any other Fabtech product, please click on the Ask A Question link located at the very top of this page.