Fabtech 2009-2013 Ford F150 4wd UniBall Upper Arm # FTS22159

The Fabtech FTS22159 is a direct replacement for the factory upper arm on the 2009-2013 Ford F150 4x4 trucks. Please note that these arms require aftermarket wheels with no more than 5.00" inches of back space.

Fabtech FTS22159 Features:
These Fabtech Upper Arms feature a welded gusset that reinforces the Uniball cup to the Chromoly Arm tubes for exceptional strength. The Uniball used is a large 1" ID Stainless Steel PTFE lined American made FK Uniball bearing that is indexed to the Arm to allow for increased travel when utilizing Dirt Logic Coilover shocks or other companies leveling kits or lift system. Bushing barrels and Chromoly Arm tubes are strengthened by welded gussets to distribute load across both parts rather than at just the point of the welded barrel. Greaseable polyurethane bushings provide a smooth connection to the frame without squeaks.

Fabtech uses thick .250" wall DOM tubing on the bushing barrels to prevent failure during severe duty use. The arms themselves are constructed with .120" wall 4130 Chromoly tubing that is the same type of tubing used in Trophy Truck fabrication for unsurpassed strength. The Heat Treated 4340 Uniball Pin is super strong and allows installation without modification to the spindle. Fabtech UniBall Control Arms can be removed and the truck returned back to stock without issue if necessary. This is ideal for trucks that are leased that will must be turned in with a stock suspension. The misalignment spacers are constructed out of 17-4 Stainless and these allow the Uniball to travel without interference to the arm or spindle while adding strength to the cross section of the Pin.

For more information about this or any other Fabtech Motorsports product please click on the "Ask A Question" link located at the very top of this page.