Fabtech 1995.5-2004 Toyota Tacoma 3" Lift Spindle # FTS4130-7

Fabtech Motorsports 1995.5 - 2004 Toyota Tacoma 5-Lug 3" Lift Spindle # FTS4130-7. These Fabtech FTS4130-7 3" Lift Spindles will only fit 5-Lug Trucks! If you have a 6-lug Tacoma these parts will absolutely not fit. These Fabtech Toyota Tacoma 3" lift spindles will raise the front of your 1995.5 - 2004 2wd Toyota Tacoma a full 3 inches and also increase ground clearance by about the same amount! This added front height provides room for larger than stock tires and more ground clearance. Additional ground clearance helps keep your Tacoma going when the pavement stops and the trail begins.

Fabtech FTS4130-7 Contents:

1 x FT4130-7P - Passenger Side Spindle
1 x FT4130-7D - Driver Side Spindle
4 x FT4130-7-2 - Steering Arm Inserts
4 x Cotter Pin
1 x Thread Locking Compound
2 x 1/4" SPLIT WASHER
2 x 1/4" FLAT WASHER
2 x 1/4" x 3/4" Bolt
2 x Adel Clamp

Important - Please Read:

This item includes the pair of Fabtech FTS4130-7 Lift Spindles and basic installation hardware. This item is sold separately for customers that want to piece their own lift together. Fabtech offers a number of accessories that are sold separately. The Fabtech FTS200 Rear Add-A-Leaf will provide between 1.5" and 2" inches of rear lift. Fabtech also offers the FTS2096 2" Rear Lift Shackles. Your Toyota Tacoma lift kit may also require replacement FTS7163 rear shock absorbers. Replacing the front shocks is optional (not mandatory) when installing FTS4130-7 lift spindles.

Product Fitment:

1995.5 Toyota Tacoma 5-Lug
1996 Toyota Tacoma 5-Lug
1997 Toyota Tacoma 5-Lug
1998 Toyota Tacoma 5-Lug
1999 Toyota Tacoma 5-Lug
2000 Toyota Tacoma 5-Lug
2001 Toyota Tacoma 5-Lug
2002 Toyota Tacoma 5-Lug
2003 Toyota Tacoma 5-Lug
2004 Toyota Tacoma 5-Lug

Tire and Wheel Fitment:

Please note that factory wheels cannot be used with this lift. This is because of tire/wheel clearance issues with the upper portion of the Fabtech lift spindle. Fabtech recommends the use of aftermarket wheels with a maximum back space of 3.75" inches.

Front Shock Information:

The optional front shock (FTS7078) has a larger shock body diameter than the factory installed Toyota shock. Installation will require enlarging the lower control arm opening to allow the Fabtech shock to be installed. Performance Lifts no longer accepts the return of the FTS7078 because the installer is too lazy or unwilling to take the time necessary to modify the lower arm and install the larger body shock. Fabtech offers this larger shock as they feel it is necessary to better control the additional weight of the larger than stock tires this spindle lift is designed to run.

For more information on the Fabtech FTS4130-7 Spindle Lift, please click on the Ask A Question feature located at the very top of this page.