FOX 2021+ Bronco Factory Race Series 3.0 Rear Coil Over # 883-06-205

FOX 2021+ Bronco Factory Race Series 3.0 Rear Coil Over # 883-06-205. FOX Factory Race Series 3.0 Internal Bypass shocks for the Ford Bronco deliver position-sensitive damping technology, Dual Speed Compression (DSC) adjustment, and high-speed ready performance in a bolt-on kit. Patented Internal Bypass technology allows for multiple zones of damping control. The result is a comfortable, confident ride with increased damping force through rough terrain. Internal bypass shocks produce more force progressively to control hard bottom-outs, prevent harsh top-outs, and provide an initial catch for landing. Shock fluid bypasses the main piston through a series of bleed holes in the ride zone. As the shock extends past the ride zone in rebound or compression, the bleed holes terminate, forcing fluid through the main piston.

Finned external reservoirs and aluminum shock bodies keep shock fluid temperatures cool for better performance. Type III anodization prevents corrosion and wear of the 3-inch diameter bodies. The DSC adjuster allows you to dial in your Bronco for load, environment, and driving style.

FOX Internal Bypass shocks deliver the support and confidence you need while driving high-speed through rugged terrain. Experience race-bred performance next time you leave the pavement.

Easily adapt your shocks for load, environment, and driving style using the DSC adjusters as the large capacity dampers manage stability through all types of terrain. Additionally, you have a generous amount of preload adjustment to maintain your Bronco’s ideal ride height while supporting a wide range of essential added gear. FOX Factory Race 3.0 Series shocks provide the versatility required to navigate backcountry terrain on the weekend and tackle your daily commute while you remain comfortable and in control.

FOX 883-06-205 Important Information:

The lift height these coilovers can provide will vary. A Sasquatch 2-Door will see approximately 2.5" of lift, 4-Door Sasquatch 2" inches, 2-Door without Sasquatch 3.5" and 4-door without Sasquatch 3" inches of lift. These lift heights are VERY approximate and are in no way guaranteed. If you have added accessories to your Bronco it probably weighs more than a stock one. Heavy vehicles achieve less lift out of the box than lighter ones. But there is Good News! The FOX 3.0 coilovers are easily adjusted and you can fine tune the ride height by increasing or decreasing the coil spring preload.

Shock Information
Extended Length = 26.420"
Compressed = 18.450"
Travel = 7.970"

For more information please click on the Ask A Question link located at the very top of this page.