ICON 2010-2014 Ford SVT Raptor 3.0 Rear Reservoir Shock System # 95200

The ICON 3.0 ZETA Ford SVT Raptor Shocks are a true 3.0" (inside and out), three tube External Bypass shock. The ZETA Shocks are not like your regular bypass shock that you see on Trophy Trucks and other off-road race vehicles. Each bypass valve has a specific port design and is individually equipped with a different spring rate to ensure proper performance at each zone of shock travel. These same bypass valves feature dampened valve stops for quiet and precise operation. That means you will not hear the typical Bypass shock clicking noises as you hit bumps while driving down the road. The biggest difference in these shocks versus an industry standard bypass shock, are the Easy-to-Adjust knobs and the replaceable bypass tubes. The Easy to Adjust, Hi Resolution Clicker Knobs do not require any tools for adjustment, and can be adjusted in seconds from plush off-road performance to firm on road manners for extra control while driving the mountains or towing a trailer. Another unique feature of this shock is the replaceable bypass tube design. Should an ICON ZETA bypass tube become damaged it can be replaced relatively easily. With a traditional bypass shock the tubes are welded to the shock the body which means when the tube is damaged the shock body (which can cost hundreds of dollars) would need to be replaced.

Key Features:
3.0 OEM Replacement PiggyBack Reservoir ZETA 3 Tube Bypass Rear Shocks
Easy-to-Adjust Detent Equipped Adjustment Knobs Offer Quick Adjustability without the Use of Tools
High Resolution Bypass Valves Designed for Noticeable Fine Tune Adjustments in Rebound and Compression
High Flow CNC Machined Welded Bypass Blocks designed to Increase Fluid Flow for Enhanced Performance & High Definition Tuning
Replaceable Bypass Tubes That Can Easy Slide in to Position if you were to Dent or Damage One
Direct Bolt in to OEM Location with Bypass Adjustment Knobs Easily Accessible for Tuning Adjustment
Special Engineered Dampened Valve Stops for Quiet and Precise Operation without the Standard Bypass Clicking Noise
Multi Stage Cad Plated Finish with Polished and Anodized Top Cap / Rod Ends
UHMH Machined Shaft & Rod End Protective Shin Guards Standard with Every Kit

Tech Info:
Fits Ford F150 Raptor SVT Factory OEM Rear Shock Location
Sold in Pairs - Right and Left Side Specific Shocks

For more information on this or any other ICON Vehicle Dynamics product please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via Standard Ground Service to any address in the 50 United States of America!