ICON 2019+ Ram 1500 2wd & 4x4 2.5 IR Coilovers # 211010
The 2019+ Ram 1500 2wd and 4x4 are more popular than ever but they still have a few shortcomings... the bean counters cheaped out on the factory shock absorbers. The factory front shock and coil carrier was not designed to provide maximum performance on or off-road. Dodge engineers design the factory parts to be sufficient for the average truck owner and the bean counters make sure the parts are cheap to build. That is why the ICON replacement coilover kit exists... the ICON 211010 Adjustable Coilover is a true performance spring over shock assembly that has been designed and built specifically for the Ram 1500 trucks to provide maximum on and off-road ride control and optimum handling.
Keep reading below for more details...
| Brand | ICON Vehicle Dynamics |
|---|---|
| Manufacturer | ICON Vehicle Dynamics |
| Part Number | 211010 |
| MPN | 211010 |
| GTIN | 840103411781 |
| Vehicle Year | 2022, 2021, 2020, 2019 |
| Vehicle Make | RAM |
| Vehicle Model | Ram 1500 |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
| Country of Origin | USA |
This ICON Vehicle Dynamics replacement coilover # 211010 is designed for use on Gen 5 trucks only. That means 2019, 2020, 2021 and 2022 model years only. These coilovers are more than a lift or leveling kit... they deliver a major increase in suspension and handling performance over the stock parts they replace. An added bonus is this ICON coilover can be adjusted to provide between 0" and 3" inches of additional lift over stock height. If you want to level your Ram 1500 4x4 this coilover will allow that. If you want to run larger than factory tires this coilover will allow that too! The ICON 211010 coilover is one of the most performance oriented leveling system available on the market today.
Technical Specs:
Adjustable ride height
Race shock piston with flutter stack compression valving
Large Diameter coil-spring
Cad-plated threaded body
Billet aluminum upper mount
Forked lower mount for factory like fitment
Completely re-buildable
2.50" shock diameter to reduce overheating
Optimized shock location for maximum clearance
Integrated bump & droop stops
100% Made in the USA
Nitro-steel shaft will not chip or rust like chrome shafts
Fitment Information:
These ICON Vehicle Dynamics coilover shocks be installed on a wide range of model years but you must pay close attention to the fitment guidelines. The ICON # 211010 are NOT designed for use on the earlier 4th Generation trucks. ICON # 211010 will also fit the updated 5th Generation 2019, 2020, 2021 and 2022 model year 2wd and 4x4 trucks. Yes, this coilover will fit 5th Generation 2wd models! Will NOT fit any Air Ride models! Rebel models can achieve between 1.25" and 2.25" lift over stock height.
Important - Please Read!
Installation of this extended travel coilover requires installation of aftermaket front upper contrrol arms. ICON Part #s 218550DJ or 218560DJ recommended.
For additional information on this or any other Icon Vehicle Dynamics product, please click on the Ask A Question located at the very top of this page.
This item ships for FREE via Standard Ground Service to all addresses located in the contiguous 48 United States of America and Hawaii!
| Brand | ICON Vehicle Dynamics |
|---|---|
| Manufacturer | ICON Vehicle Dynamics |
| Part Number | 211010 |
| MPN | 211010 |
| GTIN | 840103411781 |
| Vehicle Year | 2022, 2021, 2020, 2019 |
| Vehicle Make | RAM |
| Vehicle Model | Ram 1500 |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
| Country of Origin | USA |