ICON 2022+ Toyota Tundra 2.5 Reservoir Coilovers # 58770

ICON Vehicle Dynamics Toyota Tundra 2.5 Reservoir Front Coilover Shocks # 58770. ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2022+ Toyota Tundra. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 1-3” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. ICON's larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear shock absorbers vehicle control will be balanced front to rear resulting in the best overall driving experience for your Tundra

How much lift will I get?
That's a great question but you might not like the answer. This ICON coilover has a threaded body which allows you to raise or lower the upper spring seat. If you increase the spring pre-load the truck goes up. If you decrease the spring pre-load the truck goes down. That's an over-simplification of how an adjustable coilover can lift your Tundra but that's important to remember. Here is where it gets messy. Your fancy well optioned Tundra might be heavier than your neighbors stripped down model. Or yours might be the stripper and his the fully loaded model. If you take a set of coilovers that have the preload set to provide 2" of lift on a truck that has 2000lbs over the front tires and then install the same coilovers on a truck with 2500lbs over the front tires the heavier truck will achieve less lift. Hopefully that makes sense. If it doesn't go back and read it again. What that means is to achieve the same 2" of lift on the heavier truck the spring will require MORE preload. So out of the box the lift height can vary wildly based on the weight of the truck the coilovers are installed on. So your buddy might tell you he got exactly 2" inches of lift from his coilovers right out of the box with no adjustment and you decide that you want to get the same exact lift height as his truck because you like that look. Well it turns out your truck and his truck are drastically different in weight. So you install these coilovers and you only get 1.5" inches of lift and then call somebody to complain. Well the simple fact is your truck is heavier than his and you'll need more spring preload to achieve the lift height you want. And that's OK because these coilovers are HEIGHT ADJUSTABLE. Grab your spanner wrench and start adjusting! But don't go beyond what ICON recommends. Exceed the maximum recommended preload and the ride will suffer and you can destroy parts if the springs go to coil bind.

Features & Benefits
Adjustable ride height from 1" - 3" of lift over stock
Mounting Bracket Orients Reservoir for Optimum Tire Clearance
External Reservoir Ensures Maximum Cooling
Chrome-silicon spring
250 PSI nitrogen-charged internal reservoir
Race shock piston with flutter stack compression valving
Kit Includes Sway bar relocation brackets
Kit also Includes Reservoir Mounting Brackets
Cad-plated threaded body
Billet aluminum upper mount
5/8" PTFE-lined spherical bearing
Completely re-buildable
Hose Length Optimized for Increased Fluid Transfer

How many shocks do I get?
ICON sells these coilovers as a matched pair. That means you get 2 shocks. We've had customers not understand the term PAIR before so we'll make it simple... buy this item and you will get 2 shocks as shown in the product image.

TECH INFO:
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: 17x8.5" w/ 5.75” Backspace / 25mm Offset
Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
TECH NOTE: Lift heights above 2.25” require sway bar drop bracket kit part number 55154
TECH NOTE: Lift heights above 2.25” over stock require aftermarket front UCAs to maintain proper alignment
TECH NOTE: Tundras equipped with Load-leveling Rear Height Control Air Suspension may not sit level. Rear lift options for air equipped trucks coming soon!
TECH NOTE: 2022 Tundra SR5 equipped with TRD Sport packages will have lift height range of .5-3” over stock
TECH NOTE: Not compatible with Tundras equipped with Adaptive Variable Suspension (AVS)
TECH NOTE: Not compatible with Tundra TRD Pro

For more information on this or any other ICON Vehicle Dynamics product please click on the ASK A QUESTION link locate at the very top of this page.