ICON Vehicle Dynamics 6" Fabricated Lift Blocks # 196275

This ICON Vehicle Dynamics # 196275 part number includes one pair of 6" Fabricated Steel Lift Blocks, no more and no less. This item will fit all 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016 model year Ford F250 and F350 Super Duty Trucks. This 6" Block can also be used on all 2000, 2001, 2002, 2003, 2004 and 2005 model year Ford Excursion 4x4 vehicles.

ICON Fabricated Lift Blocks come complete with a fully welded built in bump stop. These ICON lift blocks are built with no taper (they are flat blocks) and are designed this way to maintain factory pinion angles in an effort to prevent drive-line vibration. ICON powdercoats these blocks in a low gloss Black finish to help prevent the buildup of ugly rust that you normally see with un-coated cast iron blocks. Please note, the total rear lift height will be less than 6" inches when you replace your existing block with this ICON 19-6275 6" Lift Block. Example: If your factory block is 2" inches tall and you install the ICON 6" Block your actual lift height increase will only be 4" inches.

Extended length U-Bolts are available for purchase separately and will in most cases be required. The factory Ford U-Bolts are NOT long enough for use with a 6" Lift Block.

For more information about this or any other ICON Vehicle Dynamics Product please click on the "Ask A Question" link located at the very top of this page.